What's new
By:
Filters

---> Get your Deco multigame Here <---

I just wanted to post a pic of the 3D printed case I designed to use the clips from an original Security dongle to house the Multi PCB.
The final revision is being tweaked and will be done soon, but @Darksoft asked me to post.

What a great multi for such an interesting part of arcade history.
 

Attachments

  • 1667457474844.png
    1667457474844.png
    625.2 KB · Views: 90
  • 1667457519771.png
    1667457519771.png
    610.7 KB · Views: 89
  • 1667457535299.png
    1667457535299.png
    326.6 KB · Views: 90
  • 1667457548001.png
    1667457548001.png
    421.4 KB · Views: 92
I ordered some black finish nyloc nuts and will build up a full / final Revision.
Will keep everyone posted.
 
Darksoft said:
@SCUBA King if you dont plan to sell them, can you upload the files so people can print this case locally?
Click to expand...
@Darksoft after all the cool shit you have done for the hobby (I have F3, DECO and CPS2 myself) the least I can do is offer up these designs for others to print if they want to supe up their Darksoft Deco Cassette multi.

I may add an extra hole in the side rails in case people don't have the original clips from a dongle, or don't want to strip one to use them, then they could zip-tie through instead.

Once I am happy with the final design I will post up and put the link here for download.

Thanks again to @Darksoft and @Mitsurugi-w for the support and cool stuff.
 
SCUBA King said:
@Darksoft after all the cool shit you have done for the hobby (I have F3, DECO and CPS2 myself) the least I can do is offer up these designs for others to print if they want to supe up their Darksoft Deco Cassette multi.

I may add an extra hole in the side rails in case people don't have the original clips from a dongle, or don't want to strip one to use them, then they could zip-tie through instead.

Once I am happy with the final design I will post up and put the link here for download.

Thanks again to @Darksoft and @Mitsurugi-w for the support and cool stuff.
Click to expand...
Thanks!!
 
The sticker should have my logo instead of Darksoft's.





Just kidding. ;)
 
Next Revision is complete.
Assembled using the metal clips from security dongle.
Before assembly I used countersink on the back side so the flathead screws will sit flush with the back.
If i get more time, I will add the countersink to the design

I used:
3pc M3x25 flathead screws (do not install screw in hole closest to ribbon cable at the top)
2pc M3x5 socket head screw to hold clips
5pc M3 nyloc nuts.
 

Attachments

  • 1667810903869.png
    1667810903869.png
    329.5 KB · Views: 71
  • 1667811159773.png
    1667811159773.png
    792.9 KB · Views: 69
  • 1667811197273.png
    1667811197273.png
    657.8 KB · Views: 76
  • 1667811241092.png
    1667811241092.png
    726.8 KB · Views: 76
So I know this is an old thread but are these done and ready for purchase?

Thanks in advance guys!
 
This may be a bit off topic, so just in case i apologize. Does anyone here have the actual dataeast deco mini tape deck that they may want to sell. If yes please pm me.

Many thanks in advance
 
ccatalyst said:
This may be a bit off topic, so just in case i apologize. Does anyone here have the actual dataeast deco mini tape deck that they may want to sell. If yes please pm me.

Many thanks in advance
Click to expand...
I have a couple, DM me an offer and I can dig them out
 
You must log in or register to reply here.
Back
Top