What's new

Home Arcade System

RGB said:
That's a good question. Pre-order list for the current batch is closed, but I'll probably end up with some spare units as usual.
Click to expand...
If you have any spares I’d be interested in one if possible. Thank you
 
  • Like
Reactions: RGB
RGB said:
That's a good question. Pre-order list for the current batch is closed, but I'll probably end up with some spare units as usual.
Click to expand...
Thanks RGB, any idea about time line ? Sorry I hope I do not offend you, as there are others waiting as well. I am very new to the hobby and just getting boards already.
 
RGB said:
nonosto said:
RGB said:
That's a good question. Pre-order list for the current batch is closed, but I'll probably end up with some spare units as usual.
Click to expand...
Really...it would be deliveri is closed for me? :D
Click to expand...
You're on the list :)
Click to expand...
I PMd ya a while back and didn't receive a response. Please make sure you toss my name on there.
I need this for a grander project. Even if you got spares on hand, I got cash at the ready.
Thank you!!!
 
Hey @RGB asked to be put on the list a while back and hoping i will be able to get one but how many do you normally order when you do your batches. Just curious cause there seems to be a pretty high demand for them.
 
DarthMig said:
Just curious cause there seems to be a pretty high demand for them.
Click to expand...
It's the best supergun I've ever used PERIOD.
Can't stack the praise high enough, @RGB totally nailed that design.

And for thos of you who own a arcade cab (and think Mike's got nothing for you) check this out...
23426385166_d527845625_z.jpg


  • Support for Negatron (ability to generate negative voltage)
  • Kick condenser (support for 4/5 on edge and condense into CPS2/3 style)
  • Button Remapping (same as HAS, great feature)
  • C-Sync cleaning (similar to HAS, missing the regeneration feature)
 
jassin000 said:
And for thos of you who own a arcade cab (and think Mike's got nothing for you) check this out...
23426385166_d527845625_z.jpg


  • Support for Negatron (ability to generate negative voltage)
  • Kick condenser (support for 4/5 on edge and condense into CPS2/3 style)
  • Button Remapping (same as HAS, great feature)
  • C-Sync cleaning (similar to HAS, missing the regeneration feature)
Click to expand...
Definitely need this. Not avaiable anymore?
 
Unfortunately, these didn't sell too good (if at all) and I stopped production. No plans to re-stock, I'm mainly focused on HAS right now.
 
RGB said:
these didn't sell too good (if at all)
Click to expand...
I don't think people really understood your genius with the RECO.
It's a candy cabs best friend... Because candy cabs lack -5v on the PSU, depending on the brand place buttons 4/5/6 wherever they like, and wacky sync boards will always need sync cleaning.
 
RGB said:
That's a good question. Pre-order list for the current batch is closed, but I'll probably end up with some spare units as usual.
Click to expand...
Hey RGB i send you a PM a while back , i wanted to know if you put me in the list for your upcoming batch ? :/
 
I have one of these and I'm just getting around to using it now. I moved recently and I wasn't able to take my arcade cabinet. Would someone please help me with picking out an arcade PSU that I can use with this? I have a Neo Geo MV1-FZ board. I would need something with some kind of wire adapter to plug into a standard wall plug
 
@TonyC You have the HAS cables right? Plug the forked ends of the power connector into this Happ PSU: https://ebay.us/1A3dAd

The psu and the HAS have labels. Just match 5v, gnd, -5v, and 12v

Then just take any normal 3 prong power/extension cord and cut off the end that doesn't go into the wall. strip it so enough bare wire fits under the happ screw terminals. You can run the bare wire into the happ - though it's cleaner if you add actual connectors on it. Anyway assuming it's a normal cable green is FG and the white/black are AC. You can check that with a multimeter to be sure.
 
You must log in or register to reply here.
Back
Top