J
jassin000
Splatterhouse most certainly works with the OSSC, check the settings but honestly I don't remember doing anything special at all to make it work.
Home Arcade System
- Thread starter RGB
- Start date
mines a conversion. I couldnt get it to work at all. I get audio though.
I need one with a switch to turn it on and off
XtraSmiley
Legendary
Yeah, we all do! I currently just use a power strip dedicated to the HAS. Not compact, but it works.
Jorel81
Enthusiast
Hey guys,
Question. How dangerous is the "unprocessed" setting on the csyn processing switch when using S-Video with the HAS?
Question. How dangerous is the "unprocessed" setting on the csyn processing switch when using S-Video with the HAS?
Jorel81
Enthusiast
Hey Mike,
I was wondering if you might be able to help me with something. I recently purchased an SPI board with Viper Phase 1 and Raiden Fighters Jet. When running the board with my HAS via S-Video to my tate CRT (A Sansui TV) I seem to get a rolling picture. I have tried changing settings on the CSync Level and Impedance switch, and the CSync Processing switch, but the best I can get is a color image that rolls. My CPS2, and PGM boards work great on this TV, but the SPI board is a no go so far.
I don't want to try the "Unprocessed" setting because the instructions say to only use if you know what you're doing, and I don't.
I was wondering if maybe you might have a trick up your sleeve for this kinda of issue. It's a long shot, but I thought I'd ask.
Thanks!
I was wondering if you might be able to help me with something. I recently purchased an SPI board with Viper Phase 1 and Raiden Fighters Jet. When running the board with my HAS via S-Video to my tate CRT (A Sansui TV) I seem to get a rolling picture. I have tried changing settings on the CSync Level and Impedance switch, and the CSync Processing switch, but the best I can get is a color image that rolls. My CPS2, and PGM boards work great on this TV, but the SPI board is a no go so far.
I don't want to try the "Unprocessed" setting because the instructions say to only use if you know what you're doing, and I don't.
I was wondering if maybe you might have a trick up your sleeve for this kinda of issue. It's a long shot, but I thought I'd ask.
Thanks!
gpbear4
Student
gpbear4
Student
St4rwalker
Beginner
Hi RGB!
I am highly interested in your supergun and will def. order one!
But, i really want to know if there exists power supplies w/o hazardous open contacts and 220V AC? Are
there alternatives with a case protecting from electric shocks? ie. only lines outsides are 5V or 12V etc. Thank you!
I am highly interested in your supergun and will def. order one!
But, i really want to know if there exists power supplies w/o hazardous open contacts and 220V AC? Are
there alternatives with a case protecting from electric shocks? ie. only lines outsides are 5V or 12V etc. Thank you!
RGB includes 3D printed terminal covers that fit the meanwell MWP606 and another power supply that I can’t remember.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/360127247409
St4rwalker
Beginner
Would something like this working well?
https://www.amazon.de/PeakTech-Digtial-Doppel-Labornetzteil-Labornetzger%C3%A4t/dp/B00I1GS444/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=labornetzteil+3+ausg%C3%A4nge&qid=1578550548&sr=8-3
it has even 4 channels, but only 1A on 5V instead of 15A from meanwell.
https://www.amazon.de/PeakTech-Digtial-Doppel-Labornetzteil-Labornetzger%C3%A4t/dp/B00I1GS444/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=labornetzteil+3+ausg%C3%A4nge&qid=1578550548&sr=8-3
it has even 4 channels, but only 1A on 5V instead of 15A from meanwell.
I believe it can output up to 5A however it's totally not the right style of PSU. Go for a traditional rail / arcade PSU instead.
Brentradio
Champion
You could always build a nice box around it or even have a 3D one printed. Stay safe, looks cool, works great.
That's what I would do.
BroadwayJose
Professional
Going with a proper arcade PSU is the right way to do it. If you're concerned with the open terminals, just do like I and others have done: get a cover made up to hide the dangerous parts.
This is what I bought and am currently using with the HAS:
https://twitter.com/QcRetro/status/1192862184684097539?s=19
This is what I bought and am currently using with the HAS:
https://twitter.com/QcRetro/status/1192862184684097539?s=19
ShootTheCore
Legendary
+1 for QCRetro's PSU covers - they're fantastic.
telecommand
Student
How did you get the MWP-606 cover? Has he released these already? I don't see them available on his Thingiverse page...+1 for QCRetro's PSU covers - they're fantastic.
the Goat
Grand Master
I don't know if he released the Arcade PSU covers for general sale. I believe he announced the first sales through his Twitter. I bought two. I give them a thumbs up.How did you get the MWP-606 cover? Has he released these already? I don't see them available on his Thingiverse page...+1 for QCRetro's PSU covers - they're fantastic.
ShootTheCore
Legendary
Yes, the plans aren’t up on Thingverse, and he’s only doing sales through Twitter at the moment.