What's new
By:

Home Arcade System

RGB said:
Have you tinkered with the CSync setting in the new HAS? You can try that. You can also safely use the TTL level CSync. It has a 470R resistor in series, so your receiving consumer equipment won't see the 5V CSync, but around 0.7V max, which is safe.
Click to expand...
When freshly starting the HAS, everything is working fine.
But after 1 or 2 minutes, I loose the video signal.
Indeed, activating TTL Csync level solved the issue, thanks a lot.
I don’t understand why (I’m far from having your technical skills 😉) but it’s working :thumbsup:
 
Received the white shell for my HAS yesterday, and was instantly reminded that I haven't tested my HAS V5.0 yet. So I spent a few minutes putting a test setup together and everything looks good so far. Perhaps my old V3.1 unit can go into retirement now. :)

IMG_0511.JPG
 
I’ve noticed that the Mini din 8 to ps1 connector is not available. Does anyone know if there is any other way to adapt the hd Retrovision genesis cable to the mini din 8 for use on the HAS?
 
One of the covers I ordered didn't come with screws. What is the screw size? I might have some on hand, but @RGB if you know the size off the top of your head, it'll save me a few minutes of digging out various boxes and comparing sizes.
 
  • Like
Reactions: RGB
9999 Damage said:
One of the covers I ordered didn't come with screws. What is the screw size? I might have some on hand, but @RGB if you know the size off the top of your head, it'll save me a few minutes of digging out various boxes and comparing sizes.
Click to expand...
I apologize, I must have missed those. These are M3 screws. If you can't find the correct ones, then drop me a PM and I'll send the missing screws.
 
Good day @RGB can I send you my HAS V3.2 please? I some how lost buttons A,B,C,D. I still have the start button as well as all the directional buttons. I have had this thing for a while with no issues. I tried multiple different controllers and my newer HAS with no issues. I did have the 3p/4p hat attached. I took it off and still no input on the buttons.

v/r
Kelly
 
zionfarm said:
Good day @RGB can I send you my HAS V3.2 please? I some how lost buttons A,B,C,D. I still have the start button as well as all the directional buttons. I have had this thing for a while with no issues. I tried multiple different controllers and my newer HAS with no issues. I did have the 3p/4p hat attached. I took it off and still no input on the buttons.

v/r
Kelly
Click to expand...
Have you tried going into the button configuration mode and resetting it?
1747529965184.png
 
Yep tried that and I can program the buttons but it still nothing on buttons 1-6. Tried a Neo Geo bean controller and a Sega Saturn controller and still nada.
 
RGB said:
I apologize, I must have missed those. These are M3 screws. If you can't find the correct ones, then drop me a PM and I'll send the missing screws.
Click to expand...
I didn't want to ask you to pay shipping to send a few screws around the world, so I just bought some pan head M3 wood screws and they fit great. (I had other M3 wood screws, but one had a head too large and the other was countersunk.) However... it didn't solve a minor problem I hoped it would solve:

I have two "01"-style enclosures. Both came with a clear plastic rectangle that didn't come with the black or white enclosures. I assume this rectangle is supposed to be sandwiched between the OLED and the green Plexiglass window in the outer case. On the enclosure with your original screws, the plastic rectangle stays put. In this enclosure with my own screws, the clear plastic window slides around inside even though the case is tight.

Am I doing something wrong? Is this plastic rectangle even supposed to be over the OLED, or is it just some junk I'm trying to incorporate into the case? 😁
 
  • Like
Reactions: RGB
zionfarm said:
Yep tried that and I can program the buttons but it still nothing on buttons 1-6. Tried a Neo Geo bean controller and a Sega Saturn controller and still nada.
Click to expand...
Does the LED light up? If so, it's the config issue. Have you tried to go into the rapid fire mode and exit without pressing any button?

@9999 Damage The clear rectangle is just a spare plexiglass window for the screen in case you don't like the fluorescent green that's installed in the case :)
 
RGB said:
Does the LED light up? If so, it's the config issue. Have you tried to go into the rapid fire mode and exit without pressing any button?

@9999 Damage The clear rectangle is just a spare plexiglass window for the screen in case you don't like the fluorescent green that's installed in the case :)
Click to expand...
Thank you for the advice. I had to a full device reset of the button layout. Though when reassigning the buttons on my Neo Geo MV1C with a Sega Saturn in controller in port 1, & a Neo Geo bean stick in port 2. I noticed it won't allow me to assign button D as the fourth button with the bean controller? Button A and C are assigned the same for some weird issue. Am I doing something wrong now?
 
Congrats! I haven't bought one yet.

It must be RGBS for sure, and the connector shouldn't matter. Just make sure to set the CSync to TTL if you use the HD-15. TTL can also be safely used with the R4K's SCART input, since there's a 470R series resistor in the HAS.

@zionfarm Have you tried swapping the P1/P2 controllers? Does the P2 exhibit the same problem? Have you tested another controller to pinpoint the issue?
 
You must log in or register to reply here.
Back
Top