What's new

Home Arcade System

Hey there, I'm also new to the forum. I've been watching this supergun thread and I'd like to pull the trigger on a HAS V3.1 supergun as well. If you could let me know what I need to do to purchase one I'd appreciate it. Thanks!
 
Ah, cool, that's great news! :thumbup:

BTW, I have a suggestion for the next HAS-rev:
an extra button for entering the button-remapping mode - I guess this can be useful for those who don't have NeoGeo/generic arcade controls (like me atm) and use adapters that need some time to sync with the controller.

I am using the UD-USB decoder and I couldn't enter that mode (even with a wired PS3 dualshock3)... found a workaround though as I first connected a different controller (tototek PS1 to NeoGeo), entered the remapping mode and then unplugged and connected the HD-USB.
 
Last edited:
plx2016 said:
Ah, cool, that's great news! :thumbup:

BTW, I have a suggestion for the next HAS-rev:
an extra button for entering the button-remapping mode - I guess this can be useful for those who don't have NeoGeo/generic arcade controls (like me atm) and use adapters that need some time to sync with the controller.

I am using the UD-USB decoder and I couldn't enter that mode (even with a wired PS3 dualshock3)... found a workaround though as I first connected a different controller (tototek PS1 to NeoGeo), entered the remapping mode and then unplugged and connected the HD-USB.
Click to expand...
Mind giving us the steps you took to try to enter the button-remapping mode? I'm using DB15 UD-USB decoders also and have had no issues entering the button remap on either the HAS or the UD-USB decoders so far. Their processes are different enough that they don't conflict. The way I like to do it is set the HAS with the button mapping that allows the default layout on the UD-USBs. Then if the button layout needs to be changed, I'd remap on the UD-USB only. When controllers are unplugged from the UD-USB the button mapping reverts back to default. I haven't had to change the button mapping on my HAS since.
 
Sure, it's just holding the start button and power on the HAS (oviously) to enter that mode. I tried to do that with a dualshock3 - didn't work. Am I missing something?

EDIT: yes, when using the PS3 controller, I forgot to push two buttons together with start... oh my goodness. It's working now...
:whistling:

still not possible with wireless ones, but that's OK with the workaround....
 
Last edited:
Hey, to enter the button remapping mode in HAS you just need to press and hold start+two random buttons for 3 seconds. This can be done at any point during the game.
 
I bought a used HAS 2.1 that's on the way while I wait for the newer ones to come back in stock. Can someone point me to someone that sells a compatible euro scart cable I can buy to use with it?
 
Locutus73 said:
I bought this
5vw8q7Z.jpg

Here http://www.oldskoolconsoles.com/product-page/quality-rgb-euroscart-kit-separate-audio but you have to mail them in order to confirm they have this specific adapter; they sell various cables. This is UK based, so good for buying in EU. This comes as a kit, you have to assemble/solder by yourself.
Then you have this (same adapter) https://www.ebay.com/itm/EU-SCART-t...320116?hash=item2f15823e74:g:dsIAAOSwqfNXpcUe from Australia.
And, last but not least, http://etim.net.au/shop/shop.php?crn=203&rn=543&action=show_detail this should be from the original designer/builder of the adapter (always from Australia).

Regards.

Locutus73
Click to expand...
beigemore said:
I bought a used HAS 2.1 that's on the way while I wait for the newer ones to come back in stock. Can someone point me to someone that sells a compatible euro scart cable I can buy to use with it?
Click to expand...
Based on what @Locutus73 mentioned above ... @beigemore ... you can't buy one from Tim (from Australia), also you have other options to do it from 2 other places !
 
@RGB Please add me to your list for the HAS preorder. I would like to play CPS1 hardware and am unsure what cables would i need. I have an OSSC and a rgb cable for the nes from Tim's website and plan to order the undamned controller adapter. Is that all that's required? Thanks.
 
Added, thanks! You'll only need a CPS1 cable and a power supply (trusted PSU models were mentioned a number of times in this thread). The Scart RGB cable from Tim will do the trick with the OSSC.
 
  • hey @RGB would you please add me to the pre order list. I would love to start playing cps2 and neo geo games.
 
  • Like
Reactions: RGB
RGB said:
Added, thanks! You'll only need a CPS1 cable and a power supply (trusted PSU models were mentioned a number of times in this thread). The Scart RGB cable from Tim will do the trick with the OSSC.
Click to expand...
Thanks @RGB, I have already obtained a recommended power supply from this thread. Please also add me for the CPS1 kick harness, CPS2 kick harness, 3P4P adapter PCB, CPS2 Player 3 and Player 4 harness for the 3P4P adapterand Konami Player 3 and Player 4 harness for the 3P4P adapter if you will be making them
 
  • Like
Reactions: RGB
You must log in or register to reply here.
Back
Top