What's new
By:
Filters

Irem M92 Multi Game Support

I have a question will it be compatible with my Ninja Baseball Batman I bought it à long time ago as an Korean Original.
For some of my friends it's a boot.
It's written M92-A-B and the board is really similar to my Undercover Cops just a few differences.
Thanks
 

Attachments

  • 20230910_155515.jpg
    20230910_155515.jpg
    344.7 KB · Views: 108
  • 20230910_155525.jpg
    20230910_155525.jpg
    205 KB · Views: 107
  • 20230910_155540.jpg
    20230910_155540.jpg
    282.7 KB · Views: 106
Last edited:
Berserkboy666 said:
I have a question will it be compatible with my Ninja Baseball Batman I bought it à long time ago as an Korean Original.
For some of my friends it's a boot.
It's written M92-A-B and the board is really similar to my Undercover Cops just a few differences.
Thanks
Click to expand...

Your NBB board isn't a bootleg, but it is a conversion from a different M92 game - not a Korean original NBB. It should work fine as a donor for the Multi when it's released.
 
ShootTheCore said:
Your NBB board isn't a bootleg, but it is a conversion from a different M92 game - not a Korean original NBB. It should work fine as a donor for the Multi when it's released.
Click to expand...
I'll do a rare disagree with you on this one @ShootTheCore . From what I've seen, all Japanese M92 boards have the JAMMA notch. Korean "official" ones (not pure bootleg) sometimes don't have the notch.
 

Attachments

  • 20230910_155515.jpg
    20230910_155515.jpg
    344.3 KB · Views: 72
Last edited:
I think I’m on list but doesn’t hurt to put me on again :)
 
Ok guys. We took a break from s32 development to start on M92 and we may actually get this done first. But we are going to need your help.

As you know the M92 multi in its intermediate form will rely on two daughterboards, thing is there are many different layouts.

I'd need the spacing for the following romboards:
- M92-B-G: spacing between sound ROMs (SH0/SL0, vertical layout), spacing betwwen C ROMs (C0~3, square layout)
- M92-D-A: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)
- M92-E-B: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)

I'm under the impression (low res pics I found online) M92-D-A and M92-E-B follow the same layout for both sound and C ROMs.

Any confirmation for the other boards (M92-B-A, M92-B-, M92-C-B, M92-C-N & M92-F-A) would be great too.

Thanks for any help!
 
Mitsurugi-w said:
Ok guys. We took a break from s32 development to start on M92 and we may actually get this done first. But we are going to need your help.

As you know the M92 multi in its intermediate form will rely on two daughterboards, thing is there are many different layouts.

I'd need the spacing for the following romboards:
- M92-B-G: spacing between sound ROMs (SH0/SL0, vertical layout), spacing betwwen C ROMs (C0~3, square layout)
- M92-D-A: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)
- M92-E-B: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)

I'm under the impression (low res pics I found online) M92-D-A and M92-E-B follow the same layout for both sound and C ROMs.

Any confirmation for the other boards (M92-B-A, M92-B-, M92-C-B, M92-C-N & M92-F-A) would be great too.

Thanks for any help!
Click to expand...
My Major Title 2 set is M92 A-B . if needed something from it , let me know Mitsu
 
All right!

I’ll pull my PCBs out and get some measurements for you!
 
Mitsurugi-w said:
M92-B-G: spacing between sound ROMs (SH0/SL0, vertical layout), spacing betwwen C ROMs (C0~3, square layout)
Click to expand...
I'd need to double check but I might have a B-G board, if so I'd be happy to ship it to you so you can confirm fitment directly
Nevermind it was a M107 board

I do have M92-B-A (Gunforce) and a handful of M92-B-F (MT2) boards if you'd like to borrow any of those.
 
Last edited:
Mitsurugi-w said:
Ok guys. We took a break from s32 development to start on M92 and we may actually get this done first. But we are going to need your help.

As you know the M92 multi in its intermediate form will rely on two daughterboards, thing is there are many different layouts.

I'd need the spacing for the following romboards:
- M92-B-G: spacing between sound ROMs (SH0/SL0, vertical layout), spacing betwwen C ROMs (C0~3, square layout)
- M92-D-A: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)
- M92-E-B: spacing between sound ROMs (SH0/SL0, horizontal layout), spacing betwwen C ROMs (C0~3, horizontal layout)

I'm under the impression (low res pics I found online) M92-D-A and M92-E-B follow the same layout for both sound and C ROMs.

Any confirmation for the other boards (M92-B-A, M92-B-, M92-C-B, M92-C-N & M92-F-A) would be great too.

Thanks for any help!
Click to expand...
I have a M92-B-G on my Superior Soldiers. I'll take some measurements.
 
@Mitsurugi-w can you clarify exactly what you're looking for? I think between us, we'll have most if not all of the PCBs. I can take pics, do measurements, or mail you the PCBs as needed.
 
This is super exciting news. Been waiting years for this.

I've got a NBB. I'm not sure what kind it is but I can post pics and go from there if needed.
 
You must log in or register to reply here.
Back
Top