Irken (MiSTer) JAMMA Expander

[Anselmo]

Damn, I Need this!!! Asap

 

[Ajax]

Hoping mine comes in around the middle of this week. I also scooped up parts for another Mister so I can dedicate this setup to just arcade stuff.

 

[meybarra]

Works great! I just used my current mister setup, edited the config file, cleared my old key mappings, made a minor adjustment to the monitor, and I was in business. It took me a minute to figure out the menu navigation. Brilliant work @invzim

 

[yosai]

Got around to setting this up today. Really impressed with the hardware and with the Mister preconfigured it was a 5 minute install that worked out of the box.

Thanks @invzim

 

[thegreathopper]

How does Dodonpachi play Lee? I am sure I need one of these too.

 

[yosai]

It's been about 15 years since I've owned the PCB so I can't comment on the accuracy. It plays fine, a few graphical glitches here and there and a bit of slowdown but it looks and sounds as I remember. ESP Ra De and Dangun also play fine but Guwange has quite a few graphical problems. Both my 15k cabs are set up for vert so I've not tried Uo Poko.

 

[djsheep]

Congrats on the release @invzim !

 

[BltTomato]

Can’t wait to test mine!

 

[Derick2k]

Got to play around with it a little bit last night, and I gotta admit, it just takes a few minutes to set up. Like all of Invzim's products, they are solid and just work as intended.

Thanks @invzim for another fine product for the arcade community!

 

[Dloop]

FedEx didn’t show up oh well hopefully some day soon

 

[djsheep]

It's been about 15 years since I've owned the PCB so I can't comment on the accuracy. It plays fine, a few graphical glitches here and there and a bit of slowdown but it looks and sounds as I remember. ESP Ra De and Dangun also play fine but Guwange has quite a few graphical problems. Both my 15k cabs are set up for vert so I've not tried Uo Poko.

Guwange is just there as a teaser. It’s not even in “beta” mode.

re: DDP accuracy. This video sums it up:

View: https://youtu.be/lZEsi_Ncdjs

 

[benime]

Just wanna confirm my unit is working as well, and set up from scratch was a breeze following these steps:

https://www.arcade-projects.com/threads/mister-101-setup-guide-beginners-information.16408/

https://irkenlabs.com/jamma-expander/mister-installation

 

[invzim]

Just wanna confirm my unit is working as well, and set up from scratch was a breeze following these steps:

https://www.arcade-projects.com/threads/mister-101-setup-guide-beginners-information.16408/

https://irkenlabs.com/jamma-expander/mister-installation

PLEASE skip step 8 in the first tutorial (unless you're 100% you're in gamepad mode), I'm gritting my teeth right now writing a page about gamepad mode..

 

[benime]

PLEASE skip step 8 in the first tutorial (unless you're 100% you're in gamepad mode), I'm gritting my teeth right now writing a page about gamepad mode..

Yeah I should mention I did not do that step since I knew this would be using JAMMA inputs and not a gamepad.

 

[Arikado89]

Just received mine in two days!! What kind of deal have you struck with FedEx, @invzim? Just curious. Now I need to setup the sd card and pick one of my candy cabs to test it on.

 

[wigsplitta]

My FedEx delivery went from could not deliver, to maybe deliver, to not quite sure!

All good though in the end, so I'm happy. Amazing high quality plug 'n' play work as always @invzim

 

[Ajax]

Expecting mine today!

I've got another DE10 Nano coming in, and am planning to make an image of my current Mister setup, which is in gamepad mode. To swap it over to jamma mode, is there anything I need to do? Apologize for the noob question.

 

[hursit]

I got mine today. Im out of the town but i will test it when i go back to home

 

[Dloop]

So not sure what FedEx is doing. I live in the country next to Invzim but my package still went to at least 2 other countries and then it's sitting in holding now not being delivered even though they've stated it will be delivered some days in a row now :/

 

[Derick2k]

So not sure what FedEx is doing. I live in the country next to Invzim but my package still went to at least 2 other countries and then it's sitting in holding now not being delivered even though they've stated it will be delivered some days in a row now :/

Weird! Is your country processing international packages? I have shipped to some places where the country has closed some of the mail processing centers/customs and packages have been delayed like crazy. Hope it gets to you soon man.