- Thread starter djsheep
- Start date
For Sale
BrianReboot
Enthusiast
you can use your android to update and configure the IONA, according to toyoshima it works 100%. got this info from Shou who got this from Toyoshima and i can confirmed it working. i used an Android OTG + AtoA. it's the best way in case your PC can't recognize the device.
Last edited:
A
arcadefanatic
after almost 1 year of using it for my 357 i can finally say something more!
- Pros -
Latency is really good (i was using iona for tekken, mainly 1-frame inputs attacks that are hard to time)
Custom Keybinds!
Gamepad/Stick instead of classic wired arcade stick
Compatibility between systems
- Cons -
Hot Replugging, pad plugging in-game before iona start will not work
some games that are using different input setup will not work in my case TAG 2 unlimited inputs wasnt working besides coin/service/movement (TAG 2 uses USIO setup even on NA-JV due to firmware)
contact with Toyoshim almost doesn't exist, and that's the worst con of iona. and let me tell you why!
During that one year i've got 1 answer on github and never responded me back since then, i bought that in mind with "more controllers to come" but i doubt there will be a support for more controllers or atleast input fix for TAG 2, i decided to support the dev instead of getting ali-clones but ended up with same support sadly
- Pros -
Latency is really good (i was using iona for tekken, mainly 1-frame inputs attacks that are hard to time)
Custom Keybinds!
Gamepad/Stick instead of classic wired arcade stick
Compatibility between systems
- Cons -
Hot Replugging, pad plugging in-game before iona start will not work
some games that are using different input setup will not work in my case TAG 2 unlimited inputs wasnt working besides coin/service/movement (TAG 2 uses USIO setup even on NA-JV due to firmware)
contact with Toyoshim almost doesn't exist, and that's the worst con of iona. and let me tell you why!
During that one year i've got 1 answer on github and never responded me back since then, i bought that in mind with "more controllers to come" but i doubt there will be a support for more controllers or atleast input fix for TAG 2, i decided to support the dev instead of getting ali-clones but ended up with same support sadly
I'll confirm this as working but will say with most phones having usbc ports these days and this still needing an otg adapter to work isn't any more ideal than the PC situation. I had to use an old USBC to USB otg adapter into a USB to USBC adapter to use the cable I normally use on PC(USB to USBC. Male usb into player 1 USBC into hub.)pc power supply went out yesterday otherwise I wouldn't have tried this.you can use your android to update and configure the IONA, according to toyoshima it works 100%. got this info from Shou who got this from Toyoshima and i can confirmed it working. i used an Android OTG + AtoA. it's the best way in case your PC can't recognize the device.
BrianReboot
Enthusiast
i was fortunate enough to have an old otg adapter in a box, while it's not ideal, it's a known working solution (confirmed by toyoshima) in case your PC doesn't work. there's been reports where it simply doesn't work on computers.
Strider999
Student
Is the schematic for the MP07-IONA available?
BilonFullHDemon
Student
Hi, does this thing work with namco system 11/12?
I tried mine on a Chihiro and it doesn't work. Chihiro is mostly shooting / driving games. incompatible I/O
darksofter
Enthusiast
Thank you for offering these.
I have an Astro city with a Naomi 1, Wipi and capcom io. I would like to connect gamepads, joysticks to the naomi. Do light guns also work to play house of the dead?
I have an Astro city with a Naomi 1, Wipi and capcom io. I would like to connect gamepads, joysticks to the naomi. Do light guns also work to play house of the dead?
Yep. You need the Guncon 3 for PS3.
darksofter
Enthusiast
Thank you for the confirmation.
If I want to use two hi cons, how many IONAs do I need?
darksofter
Enthusiast
Awesome. Thank you for the explanation. Does the Iona work with wipi, so that you can configure the buttons there, or do you need the openjvs hat for that?
All info is on that site I linked. It’s pretty technical but so is JVS in general. I’d advise in doing some reading before purchasing to make sure it’s the right fit.
