I use a CORSAIR CX550F RGB PSU and the ATX adapter from @invzim
https://irkenlabs.com/misc/atx-to-jst-vl-adapter
Works very well.
https://irkenlabs.com/misc/atx-to-jst-vl-adapter
Works very well.
Got in early today and tried pushing it up to 3.4v... Still nothing... Pretty certain it's the Netdimm... Not sure what else it could be.If I were in your shoes, I'd push it to 3.4v.
Sorry to hear about your shop and the constant drama you're having with this setup.
If you were local, I would've given you a helping hand already
I don't think it's an issue with the Sun PSU at all though. I get a nice spectrum of power and easily hit where I want to be.I recommend you buy this power supply, I have one installed in my naomi 2 and nothing to say, it works wonderfully and is stable.
QP-200-3A
https://a.aliexpress.com/_mLl0kMO
This power supply regulates all voltages with separate potentiometers +5V, +3.3V, +12V, -5V
although a computer power supply is cheaper and enough to power your Naomi
The N2 does boot into error 01 without a cartridge seated which I believe is normal.I had multiple issues with my blast and naomi CF with random CF cards. Like you, it would work, but then it wouldn't.
- Does the naomi boot up without the cart in it?
- Do you have a raspberry pi you can use to net boot instead of cf boot to rule things out?