DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

[Darksoft]

some connections are not completely online on some simms

You said that there is a problem in the simm itself, that some connections are not in the right place? I'm not sure if I follow. If you could show that with a picture that would be helpful.

 

[raffy92]

You said that there is a problem in the simm itself, that some connections are not in the right place? I'm not sure if I follow. If you could show that with a picture that would be helpful.

Yes if I check some simms in their slots. The pins are not completely in line. Tomorrow I will try to take a picture of it

 

[buffi]

Got mine. Works great.
Had to burn a new bios on my cart as well since it was old.
Very impressed by this project

 

[Darksoft]

Got mine. Works great.
Had to burn a new bios on my cart as well since it was old.
Very impressed by this project

I'm glad that you like it. Instant game change in a few seconds is a nice treat

 

[raffy92]

You said that there is a problem in the simm itself, that some connections are not in the right place? I'm not sure if I follow. If you could show that with a picture that would be helpful.

 

[raffy92]

I thought the pins were not perfectly in line could be a problem ?
I tried to clean up with contact cleaner the simms slots and it is much better. It is not perfect so I am continuing this way

 

[raffy92]

I thought the pins were not perfectly in line could be a problem ?
I tried to clean up with contact cleaner the simms slots and it is much better. It is not perfect so I am continuing this way

Do you have some tips to clean up efficiently the simms slots ?
Thanks

 

[Darksoft]

Flux or alcohol isopropyl shoukd work. Try shifting the simm to one side and see if the pins align better.

 

[raffy92]

Flux or alcohol isopropyl shoukd work. Try shifting the simm to one side and see if the pins align

Do you think some pins are not aligned correctly?

 

[GoldenGlover]

Check your SIMM placement in slot #3…to me, it looked like the pins weren’t centrally aligned as well as the other SIMMS you showed.

 

[raffy92]

Flux or alcohol isopropyl shoukd work. Try shifting the simm to one side and see if the pins align better.

What about using sand paper gently to remove oxidation ?

 

[raffy92]

Check your SIMM placement in slot #3…to me, it looked like the pins weren’t centrally aligned as well as the other SIMMS you showed.

Ok thanks

 

[twistedsymphony]

What about using sand paper gently to remove oxidation ?

don't do that...

for cleaning products I personally use a product call "Liquid DeoxIt" https://www.amazon.com/CAIG-Laboratories-D100L-2DB-Electric-Cleaner/dp/B0002BBVN2
combined with a fiberglas pen for agitation: https://www.amazon.com/Megacast-Fiberglass-Scratch-Brush-Pen/dp/B09Q4PK2R1

the pen is slightly abrasive but no where near as agressive as sandpaper

basically brush on a thin layer of DeoxIt then gently scrub with the pen, then wipe off with a paper towel, repeat if very dirty

 

[raffy92]

don't do that...

for cleaning products I personally use a product call "Liquid DeOxIt" https://www.amazon.com/CAIG-Laboratories-D100L-2DB-Electric-Cleaner/dp/B0002BBVN2
combined with a fiberglas pen for agitation: https://www.amazon.com/Megacast-Fiberglass-Scratch-Brush-Pen/dp/B09Q4PK2R1

the pen is slightly abrasive but no where near as agressive as sandpaper

basically brush on a thin layer of deoxit then gently scrub with the pen, then wipe off with a paper towel, repeat if very dirty

Thanks a lot

 

[raffy92]

don't do that...

for cleaning products I personally use a product call "Liquid DeoxIt" https://www.amazon.com/CAIG-Laboratories-D100L-2DB-Electric-Cleaner/dp/B0002BBVN2
combined with a fiberglas pen for agitation: https://www.amazon.com/Megacast-Fiberglass-Scratch-Brush-Pen/dp/B09Q4PK2R1

the pen is slightly abrasive but no where near as agressive as sandpaper

basically brush on a thin layer of DeoxIt then gently scrub with the pen, then wipe off with a paper towel, repeat if very dirty

Thanks I will check if I can found something similar in japan

 

[raffy92]

don't do that...

for cleaning products I personally use a product call "Liquid DeoxIt" https://www.amazon.com/CAIG-Laboratories-D100L-2DB-Electric-Cleaner/dp/B0002BBVN2
combined with a fiberglas pen for agitation: https://www.amazon.com/Megacast-Fiberglass-Scratch-Brush-Pen/dp/B09Q4PK2R1

the pen is slightly abrasive but no where near as agressive as sandpaper

basically brush on a thin layer of DeoxIt then gently scrub with the pen, then wipe off with a paper towel, repeat if very dirty

Thanks I will check if I can found something similar

 

[raffy92]

Thanks I will check if I can found something similar

Thanks I will check if I can found something similar

Thanks I will check if I can found something similar

 

[raffy92]

View: https://youtube.com/shorts/wo8Vp7KGG74?si=8iAASH5oWToeBTVT


nothing changed after cleaning. I wanted to check again if the pcb is functional so I put back the Jojo bizarre adventure and no problem, the game works well.
What else can give such graphical problem. Does the programmation could be bad ?

Thanks

 

[Darksoft]

View: https://youtube.com/shorts/wo8Vp7KGG74?si=8iAASH5oWToeBTVT


nothing changed after cleaning. I wanted to check again if the pcb is functional so I put back the Jojo bizarre adventure and no problem, the game works well.
What else can give such graphical problem. Does the programmation could be bad ?

Thanks

Do all games show graphic errors or only JoJo ?

 

[raffy92]

Do all games show graphic errors or only JoJo ?

All the games