What's new
By:

DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

So that may be the issue i bought both the ultra bios and the Super bios from Mitsu. so the no cd ultrabios would be the Standard CPU
 
hi, can someone confirm that there is no problem to run the multi ultra cps3 with a no cd security cartridge (SH2 standard) on a mobo originally used with cd right ? Or is it better to get a no cd game ?
 
In other term, I have an opportunity to get a no cd or a cd cps3 game
Which one is better if I want to use with the multi ultra simms with a cartridge Sh2-standard no cd ?
 
If you are are using ultrasimms then neither is better than the other. The pcbs are exactly the same. Buy the cheapest one that works.
 
Mitsurugi-w said:
If you are are using ultrasimms then neither is better than the other. The pcbs are exactly the same. Buy the cheapest one that
Click to expand...

Mitsurugi-w said:
If you are are using ultrasimms then neither is better than the other. The pcbs are exactly the same. Buy the cheapest one that works.
Click to expand...
I will go for the cleanest one because last time it was a bad experience
 
the mobo battery needs to be removed I know but is there any risk for the multi ultra simms, if I am making a test with the battery ?
 
I just received the programmer ,the last hardware piece I needed for the ultra simms setup.Are there any step by step instructions? also where do I get the files I needed? Thanks.
 
merrygoomba said:
I just received the programmer ,the last hardware piece I needed for the ultra simms setup.Are there any step by step instructions? also where do I get the files I needed? Thanks.
Click to expand...
Yea just go to the first post of this page for instructions as for the files just search for darksoft archive in google is what I did
 
I finished programming the Ultra Simms, tested all the games and they seem to be running well.However all but one of the Simms failed the SIMM check . Is this normal?
IMG_8150.jpeg
 
Just decided to switch up games for first time today from third strike as I was getting tired of it finally and decided to try warzard with dip set to 011 and it tries to load third strike for some reason although it freezes and doesn’t even load that. So i reprogrammed all the simms and it still does it. Switching from u9 to u10 and using a standard bios as instructions show. Used files from darksoft archives. Decided to try a couple other games to see what happens and when I try to load jojo bizarre adventure 001 it tries to load 4rd strike arrange addition. 4rd strike arrange addition works as it should set to 000. Third strike works as it should set to 010. Makoto fix works at 100. When I try to load 2nd impact it 101 it tries to load third strike and freezes. When I try to load new generation at 111 it tries to load jojo bizarre adventure heritage and freezes. When I load jojo venture 110 it loads jojo bizarre adventure and works. Have tried reprogramming now multiple times with same results
 
You must log in or register to reply here.
Back
Top