A
Apocalypse
No, it does only flashes (NOR & NAND).Is proman tl86 support erasing roms?
But your standard EPROM programmer should.
No, it does only flashes (NOR & NAND).Is proman tl86 support erasing roms?
The original ROM set had an issue where all sprites in those games were white. There is an updated sprite ROM that fixes it.Correction. I have no problem with Shadowland which is US version. Only have problem with both of Jap versions with problems which i can not see characters.
Yes. I am aware of that. I burnt roms with the latest fixed one.The original ROM set had an issue where all sprites in those games were white. There is an updated sprite ROM that fixes it.
Got it. I will try with different Seeq chip.If only those 2 games don't work, the only reason can be the EXEL/SEEQ chip.
Sorry for late posting.If the EEP-ROM is not SEEQ, I think SHADOW LAND is also a black screen.
If the latest ROM is burned and the screen is strange, there may be a different cause.
Would you like to upload some screen shots once?
I installed the last updated rom. I did not try every single games but most of them had no specific issue.Which EEPROM do you have installed? Is that the only game with those issues?
It neeeds SEEQ as a EEPROM (at the back of the main board).I installed the last updated rom. I did not try every single games but most of them had no specific issue.
I have SEEQ already installed. That is why I could run Shawdowland (YD3) with no graphical difficulties not like other two(YD1 and YD2).It neeeds SEEQ as a EEPROM (at the back of the main board).
I will try that. The problem is that I need to order adapter for TL86. Last time I burned my roms with borrowed Flashcat and it took me almost 3 hours.EEP-ROM is SEEQ.
YD3 works normally with ROMs before January 7th.
YD1 and YD2 had sprites is white.
Looking at the photo, it looks like the sprite isn't showing, using the ROM SET before January 7th.
I think it has been done many times, but please erase all the ROMs. Please burn the ROM after January 7th.
If possible, we recommend shuffling and burning the same image instead of burning it to the same ROM.
Won't this have to be done each time you change the game ? Since all these games rewrite the EEPROM in their own way.Please remove your Voice ROM gently from your darksoft's multi board and turned on the power and wait few seconds then turned off.
Now You can install Voice ROM and play without any garbage.
I think you need each time only when switch to Shadowland/Yokai from other games.Won't this have to be done each time you change the game ? Since all these games rewrite the EEPROM in their own way.