What's new

Zepherino

Student
Joined
Mar 16, 2017
Messages
77
Reaction score
66
Location
SoCal
How are the roller wheels holding up (assuming this printer uses them)? I've seen a bunch of extrusion frame printers come out over the last year or so, and many of these use plastic wheels in the extrusion V slot that seem to cause wear fairly quick and introduce slop. I do like how this one is direct drive, unlike the many bowden clones of the Ender 3.
 

Sp33dFr34k

Grand Master
Joined
Nov 8, 2015
Messages
1,301
Reaction score
947
Location
The Netherlands
For the owners of the SV01, would you guys recommend the silent board add-on?
 

Frank_fjs

Multi Boyz 4 Lyfe
Legendary
Multi Boyz
Joined
Mar 3, 2018
Messages
3,431
Reaction score
5,844
Location
Australia - Adelaide
No. It does nothing at all to improve printing or functionality aside from silencing the stepper motors, which is a moot point as when that noise is gone it's replaced by the loud fans. I actually like hearing the stepper motors, it's a good audible indication of how your printer is running.

Also, there's better silent boards with extended features from other brands. So I'd be looking into that option.
 

Sp33dFr34k

Grand Master
Joined
Nov 8, 2015
Messages
1,301
Reaction score
947
Location
The Netherlands
No. It does nothing at all to improve printing or functionality aside from silencing the stepper motors, which is a moot point as when that noise is gone it's replaced by the loud fans. I actually like hearing the stepper motors, it's a good audible indication of how your printer is running.

Also, there's better silent boards with extended features from other brands. So I'd be looking into that option.
Clear thanks, then it will be SV01 + bltouch add-on for auto bed leveling :)
 

BladeZX

Professional
Joined
Jul 11, 2019
Messages
546
Reaction score
419
Location
Canada
What version of the bl touch is best with the SV01 printer
 
Top