Hammy
Enlightened
There is a few that need to get sent in the next few days and then i will go back to building 
Official Interest list for Namco NA System Multi by Hammy (PCB design by Caius Arcade Repairs & Engineering)
- Thread starter twistedsymphony
- Start date
Kavas
Champion
Recapped this today, finally.
PSA: I would recommend a recap for anyone who gets this pcb. It was very corroded and gnarly. Even as careful as I was I pulled a couple pads that instantly disintegrated. used DeOxit to clean the traces as much as possible, cleaned with IPA, and added all fresh caps thanks to @AlxUnderBase cap list. Even included a new plastic pcb standoff to give the multi the much needed support.
PSA: I would recommend a recap for anyone who gets this pcb. It was very corroded and gnarly. Even as careful as I was I pulled a couple pads that instantly disintegrated. used DeOxit to clean the traces as much as possible, cleaned with IPA, and added all fresh caps thanks to @AlxUnderBase cap list. Even included a new plastic pcb standoff to give the multi the much needed support.
Hammy
Enlightened
Yep those traces just go under heat, thats why if those 2 x customs get leak over the board is a gonner.
26 , 27 and 28 are shipped.
Building 30,31 and 32 this weekend and then out of parts again
26 , 27 and 28 are shipped.
Building 30,31 and 32 this weekend and then out of parts again
AlxUnderBase
Enlightened
- Another good donor in Japan : https://page.auctions.yahoo.co.jp/jp/auction/p828515964
- Another good donor (Super World Court) can be found on @NikoletatosG's store (if what he have is working , can help much easier to be purchased)
- This one have sound problem : https://page.auctions.yahoo.co.jp/jp/auction/h535414117
Cheers
- Another good donor (Super World Court) can be found on @NikoletatosG's store (if what he have is working , can help much easier to be purchased)
- This one have sound problem : https://page.auctions.yahoo.co.jp/jp/auction/h535414117
Cheers
Last edited:
Hammy
Enlightened
Pinball
Enthusiast
No message here 
Hammy
Enlightened
33- @Pinball (FA)
34- @mbandala (FA)
35- @Psyko-M1 (F
Will get the 1st ones of the next batch that will be in a few weeks.
Indeed, you will be first for the new run, the blank PCB's from the first batch ran out at number 32.
Pinball
Enthusiast
Ah ok thanks. I misread.
mbandala
Student
Sure! When do you need the money to be sent?
Hammy
Enlightened
The 3 people on "page 8" from the main list are messaged, not the last 3.
One is paid but there is still a chance one could drop out, give them some time to check the message!
Everything is here in parts except blanks so as soon as they arrive and are OK the final 3 will be contacted.
Myself will be downgraded for 1.3 too for a very short time so don't worry it won't be long
One is paid but there is still a chance one could drop out, give them some time to check the message!
Everything is here in parts except blanks so as soon as they arrive and are OK the final 3 will be contacted.
Myself will be downgraded for 1.3 too for a very short time so don't worry it won't be long
Johnfan1986
Professional
HI Hammy,
Could i order 1 Fully Assembled kit?
I would shoot you a PM.
Thanks
Could i order 1 Fully Assembled kit?
I would shoot you a PM.
Thanks
Hammy
Enlightened
New stock arrived, I will get the main list updated ASAP and then it's back to building!
YAY! I'm sure the wait will be worth it. Looking forward to this.
Hammy
Enlightened
First post updated, VERY close to the end now 
Page 12 will be contacted very soon! For the rest of this week i need to focus on clearing the decks there's a few USA stuff waiting....
Stuff has to be right, can't send shite out. Quality takes time
So far ZERO issues with the multi everyone is up and running
Page 12 will be contacted very soon! For the rest of this week i need to focus on clearing the decks there's a few USA stuff waiting....
Stuff has to be right, can't send shite out. Quality takes time
So far ZERO issues with the multi everyone is up and running
Kavas
Champion
Multi selector when?First post updated, VERY close to the end now
Page 12 will be contacted very soon! For the rest of this week i need to focus on clearing the decks there's a few USA stuff waiting....
Stuff has to be right, can't send shite out. Quality takes time
So far ZERO issues with the multi everyone is up and running
Hammy
Enlightened
Multi selector when?
We already discussed this in the early days and my on screen menu was scrapped (and prob. lost at this point)
If your looking for one of those spinny selectors, or just something on remote it's only 5 wires.
Another thing was it's possible to cycle games each reset (part of the "neogeo mode" also scrapped due to complaints)
Everyone was divided on the way, so nothing happened
I will promise a program update in the future there's some improvements to the RNG to be added and some cleanup.
Also a tinkle pit custom arrived so that game can finally get a side by side comparison and any fixes if required.
EDIT: and also if the rare PAC attack ever shows up there will obviously be an update...
Kavas
Champion
I have a ton of those spiny thing parts now. If you throw me where those points are maybe I can tinker.
Hammy
Enlightened
Set the dips to the non - gnd position..
And then it's 4 wires (the 4x non +5volt positions on the array)
Take a ground too and it should be the equivalent to 4x push buttons same as a control panel.
And then it's 4 wires (the 4x non +5volt positions on the array)
Take a ground too and it should be the equivalent to 4x push buttons same as a control panel.
truxpin
Student
Any chance of being added to the list for 1x DIY kit as i finally found a good donor pcb thanks