Thanks Invizm for your quick and clear reply. I can certainly act as the lowest common denominator - if i understand it, it means everyone will
. That is good news and cannot wait for this. Will order as soon as they are available.
- Thread starter invzim
- Start date
. That is good news and cannot wait for this. Will order as soon as they are available.
Site updated, pulled out a lot of boxes for testing of a release-candidate firmware today. Looking good so far, unless @rtw ruins it (again 
)
https://irkenlabs.com/retro-scaler-a1/tested-sources
)https://irkenlabs.com/retro-scaler-a1/tested-sources
Last edited:
Getting very excited, my Crazy Taxi (31k only) to NNC sitdown is pretty much complete and this will be the final piece to finish it off.Site updated, pulled out a lot of boxes for testing of a release-candidate firmware today. Looking good so far, unless @rtw ruins it (again
https://irkenlabs.com/retro-scaler-a1/tested-sources
BIG thanks to @rtw who pulled out a lot of boxes and put the Scaler through it's paces last couple of days. Also big thanks to @geekmiki who helped test the console side of things.
https://irkenlabs.com/retro-scaler-a1/tested-sources updated
The sources are analog and sometimes noisy, which there is not a lot that can be done about - but in general I'm very pleased with the results.
https://irkenlabs.com/retro-scaler-a1/tested-sources updated
The sources are analog and sometimes noisy, which there is not a lot that can be done about - but in general I'm very pleased with the results.
It is finally available! Plan was to have it out in 2019, but didn't anticipate cutting it this closeHi, very impressive work!
It's not available through the shop at the moment, isn't it?
Head over to https://irkenlabs.com/store/products to snag one.
I can ship out tomorrow Monday, and possibly Friday.
I'm trying to check out and it won't allow me to because I can't select a shipping option.It is finally available! Plan was to have it out in 2019, but didn't anticipate cutting it this closeHi, very impressive work!
It's not available through the shop at the moment, isn't it?
Head over to https://irkenlabs.com/store/products to snag one.
I can ship out tomorrow Monday, and possibly Friday.
Man, thanks for feedback! Forgot to enable shipping and set length/weight for the FedEx thingie. Please try againI'm trying to check out and it won't allow me to because I can't select a shipping option.It is finally available! Plan was to have it out in 2019, but didn't anticipate cutting it this closeHi, very impressive work!
It's not available through the shop at the moment, isn't it?
I can ship out tomorrow Monday, and possibly Friday.
Congrats on the release!
I’m looking forward to hearing about anyone’s experience with this once they get it. It’s hard for me to pull the trigger yet, as I’d need a jammafier also. I’d love to hear if people are happy with jammafier+A1 as a way to jamma-fy a Vewlix vs existing methods.
I’m looking forward to hearing about anyone’s experience with this once they get it. It’s hard for me to pull the trigger yet, as I’d need a jammafier also. I’d love to hear if people are happy with jammafier+A1 as a way to jamma-fy a Vewlix vs existing methods.
No worries, and thanks, successfully checked out this time!Man, thanks for feedback! Forgot to enable shipping and set length/weight for the FedEx thingie. Please try againI'm trying to check out and it won't allow me to because I can't select a shipping option.It is finally available! Plan was to have it out in 2019, but didn't anticipate cutting it this closeHi, very impressive work!
It's not available through the shop at the moment, isn't it?
I can ship out tomorrow Monday, and possibly Friday.
wigsplitta
Professional
using it with the jammafier?
wigsplitta
Professional
Yep, it’s a full invzim jamma —> JVS/lcd monitor setup. Plug ‘n’ play goodness
Yup, the USB port on the Jammafier was put there for the scaler to make it a bit easier inside the cab.
So my use case might be a tad different from your original design and not sure how/if you want to solve some syncing issues or just write it up to "sammargh is doing stupid shit" but here goes:
Got your scaler and one of the things I wanted to use it with is my x68k CRT as it doesn't like composite sync. I'm able to get it to function with 15khz sources if I turn bypass on, color to 75-ohm and sync to scart. If I turn the bypass off the monitor sees a 31khz signal but is unable to sync to it and everything rolls/is skewed. It works as-is with bypass considering the CRT is a tri-sync but it does seem that there's something wrong with the sync being output on the line-doubled signal.
Got your scaler and one of the things I wanted to use it with is my x68k CRT as it doesn't like composite sync. I'm able to get it to function with 15khz sources if I turn bypass on, color to 75-ohm and sync to scart. If I turn the bypass off the monitor sees a 31khz signal but is unable to sync to it and everything rolls/is skewed. It works as-is with bypass considering the CRT is a tri-sync but it does seem that there's something wrong with the sync being output on the line-doubled signal.
