DoneCan I please get on the wait list for audio and kick board.
Thank you
True, no promises! Just an idea. Still want an F3 regardless...Do note that the F3 outputs amplified audio from the aux connector, so you'll have to do attenuation on your board or tap the motherboard for line level audio. Otherwise a set of RCA connectors can be somewhat misleading.
I appreciate the offer! I will let you know. I should have an STV board with the factory IO coming in the next week or so. Once I have the board it should be pretty quick to resolve.Got my board today and checked against both of my STV mobos. Both have the factory IO boards and both match the incompatible layout exactly. It's close, but looks like it will be a pin or two off on CN25 if I use CN21 as the main point.
If there's anything I can capture off of my mobo to help you, just let me know.
I don’t think there will be clearance issues. I don’t have an IO board for myself at the moment, but I’m almost positive it’s shorter than the audio heat sink. So as long as the case clears the heat sink it should be fineI think this is twice the price as Lions3 case but has an LCD mount. Acrylic and not metal too. Not sure if there are any issues with clearance after adding the Everten pcb though.
https://www.highflow.nl/behuizingen/sega-st-v-acrylic-case.html
You are right, it is shorter than the heatsink so should be fine.I’m almost positive it’s shorter than the audio heat sink. So as long as the case clears the heat sink it should be fine
Don’t forget the 90 degree cart riserAfter this we just need someone to come up with an awesome metal case for the st-v with LCD support
that's far more important than a case IMO.Don’t forget the 90 degree cart riser
subjective for sure , but something similar to the TRFightstick cps2 multi case would be godlike for Sega ST-V especially if there's enough clearance for the I/O for the st-vthat's far more important than a case IMO.Don’t forget the 90 degree cart riser