What's new

SUN PSU capacitor maps

Just did my first cap kit on a Sun psu. Power was jumping up and down. Fixed it beautifully and know she’s running steady. Thanks for the cap list boys, made ordering a lot easier.
 
  • Like
Reactions: nem
Does anyone happen to have a 400-5397-01 Sun psu on hand they can check a resistor value for me? It's R18 next to the fuse, mine has rusted in half so I can no longer see the colour rings or read the value with a meter. I've marked on this picture where it is, if someone could tell me the value and confirm they have the same revision board that would be very much appreciated.

400-5397-01.jpg
 
Could I ask what the fuse size/rating is for the 400-5397-01? I managed to get enough power through the one I have to get some noise out of it (and a blown fuse). I still have a second transistor to replace but it's taking forever to get here.

.... and who'd have thought it was right on the board by the fuse :D Got it!
 
Last edited:
Anyone have a source for a cap kit for 400-5443-01? Or have the caps I need? I realize there's digikey but what a pain for a few individual caps. I mistakenly bought the 400-5443 so I don't even need all the caps, just the differences.

Also looking for a Lindbergh 400-5457 kit.
 
Last edited:
Heya!

I have a revision of the 400-5397-01 that hasn't been previously documented in this thread!
[Original post moved here to keep this thread tidy.]

Here you go:

Code: 
Manufacturer: Sun Electronics Industry Co., Ltd.
Model No.:    400-5397-01
Revision:     Unknown / Unspecified; characterized by dual, 18mm 470uF 200V capacitors, and parallel, vertically-oriented heat sinks.
Input:        AC100-120V, 3A, 50/60Hz
Output:       DC 3.3V 12A, 5V 10A, 12V 2A

Capacitor        Diameter    Qty     Location

1000uF 16V       10 mm       5       C25, C26, C27, C28, C32
4.7uF  50V       5  mm       2       C5, C6
470uF  200V      18 mm       2       C1, C2
1uF    50V       5  mm       1       C12
10uF   50V       5  mm       1       Fan Controller Daughter Board
330uF  10V       6  mm       1       C16
47uF   50V       8  mm       1       C11
470uF  10V       8  mm       1       C29
470uF  16V       8  mm       1       C30
680uF  10V       8  mm       1       C10

capMapFinal.jpg
SunPSUfanControllerDaughterBoard.jpg
 
Last edited:
Is there no model number on the actual pcb? It must be a real Sun psu it looks like it has the right wires coming out. We just got to figure out which revision. Anymore pics?
 
You must log in or register to reply here.
Back
Top