Hakeshu
Beginner
werejag do you know any place that has the schematics or the adpter to sell?they make adapters
werejag do you know any place that has the schematics or the adpter to sell?they make adapters
Thanks nem. With this adapter I'll be able to burn any 42 pins eprom? Nice to know. Now time to find a place to craft the board.https://circuit-board.de/forum/inde...grammer-beschreiben/?postID=510739#post510739
Gerber files for an adapter, however, you need to register there. Maybe someone here who's a member there can host?
Nice link. I tried to register but got the message "Die Registrierung ist momentan deaktiviert.", so.... we need a member to help us.https://circuit-board.de/forum/inde...grammer-beschreiben/?postID=510739#post510739
Gerber files for an adapter, however, you need to register there. Maybe someone here who's a member there can host?
Actually you can't.I'm sure you could just buy one on ebay cheaper.
I use a TOP3000 EPROM burner. Works beautifully, even if the software is in Engrish.8bit to 16bit adapters are very common but im usinga true usb GQ-4x with a the 42 pin 16bit adpater
I guess I'm the only one using a TL866 Mini Pro hahaha.I use a TOP3000 EPROM burner. Works beautifully, even if the software is in Engrish.8bit to 16bit adapters are very common but im usinga true usb GQ-4x with a the 42 pin 16bit adpater
Quality jobs require quality tools. Even if the TOP3000 is Chinese, it works fine for those few times when I need it.I guess I'm the only one using a TL866 Mini Pro hahaha.I use a TOP3000 EPROM burner. Works beautifully, even if the software is in Engrish.8bit to 16bit adapters are very common but im usinga true usb GQ-4x with a the 42 pin 16bit adpater
Cheapest one that works for practically anything without needing adapters.pfft top3000. back with your inferior programmer ..... lol. who cares as long as this shit works in the end
Well, the upper board is fine, I tested in another working Kof 2000.I haven't tried it butI can't see why that wouldn't work. Have you confirmed it's a mask ROM issue?
yes, you'd just want to double the ROM file before programming.Can I use a 27c040 intead of a 27c020 to replace the m1?