thanks! Items are on the way. Just wondering, how is the latency for the UD USB decoders?Just get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
Or you could try this, it connects directly to the UD-USB's pin header:Just get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
Essentially non existent. Your fight stick will have more lag than the decoder. Undamned’s products are approved by competitive gamers and enthusiasts world wide. Get yourself a quality, low lag stick and you’ll never notice lag at all.thanks! Items are on the way. Just wondering, how is the latency for the UD USB decoders?Just get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
This is exactly what i've been looking for. CheersJust get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
Firmware update and check your grounds.Hi Undamned. I basically need to remap my Fight sticks buttons (it's a Hori V3 SA modded with a Brook Fighting Board PS4) every time I turn my neo geo and supergun. The same thing happened when I was using the stock PCB.
None of the buttons seems to do anything until I do the manual remap (by holding down four buttons and then pressing 1,2,3,4,5,6)
I noticed when I connected it to a CPS2 via supergun that the input test is showing that the 1 button is constantly on, and no other buttons or the stick do anything.
Once I remap the buttons everything works fine
Is this normal? Should I do a firmware update?
Just get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
You’re welcome. Credit to @BMXer3s for teaching me when I first began the Supergun journeyAbout to buy this stuff now. Thanks for the post
Just get the screw terminal version and wire it yourself.
https://paradisearcadeshop.com/home...491_undamned-usb-decoder-plus-by-ud-game-tech
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/331950758687
Then buy this
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/371370609463
Look up the appropriate button diagram and wire it yourself. You’ll need some wire strippers too
One of @Frank_fjs DB15 to Snes or MD adapters maybe?Would you by any chance support the 8bitdo 2.4g wireless Sega Genesis Mini controller? It uses a usb paired dongle and can be used on PC as well. Looking at a wireless solution of a db15 supergun.
The 8bitdo 2.4g Genesis mini uses a paired usb wireless receiver instead of a db9, so the normal supergun adaptors wont work :/One of @Frank_fjs DB15 to Snes or MD adapters maybe?Would you by any chance support the 8bitdo 2.4g wireless Sega Genesis Mini controller? It uses a usb paired dongle and can be used on PC as well. Looking at a wireless solution of a db15 supergun.
Yes I know, but I was thinking about the 8bitdo receivers for original consoles and not the USB receiverThe 8bitdo 2.4g Genesis mini uses a paired usb wireless receiver instead of a db9, so the normal supergun adaptors wont work :/One of @Frank_fjs DB15 to Snes or MD adapters maybe?Would you by any chance support the 8bitdo 2.4g wireless Sega Genesis Mini controller? It uses a usb paired dongle and can be used on PC as well. Looking at a wireless solution of a db15 supergun.