Hi! Black screen on a brand new v2 Multi / 9646B-4 with key writing lines connected. LCD allows game selection, load, successful key writing and then sits in ‘Now playing’.
Rom set: Darksoft CPS2 Roll-Up Base Pack 2019-09-18.7z
SD card: Verbatim 4GB.
Main board and adapter board are pressed down as tight as they’ll go it seems. Have tested a few connections on Main board.
Suggestions?
Rom set: Darksoft CPS2 Roll-Up Base Pack 2019-09-18.7z
SD card: Verbatim 4GB.
Main board and adapter board are pressed down as tight as they’ll go it seems. Have tested a few connections on Main board.
Suggestions?