SnakeGrunger
Professional
If he has more, lmk. Trying to figure out taobao is like a land mine.My buddy might have a few more flybacks. Let me check with him.
PM sentMy buddy says he has 4 of these flybacks. $70 shipped CONUS. PM me if you want one.
Let us know how it goes. I sent my chassis out for repair and they replaced the flyback with one of these and when I got the chassis back it was causing arcing at the neck on both of my tubes. I am praying that it's something wrong with the chassis and not my tubes. The chassis went back and I am anxiously waiting for its return.I received one of these and I'm going to use it to try and resuscitate an MS-2931. With the sizing issue, the HV might simply be a bit too low (lower HV produces a larger image due to reduced electron travel speed). With an HV probe, the HV can be tested.
Check out what @gunblade wrote about these - got an hv probe- check those nanao/ tosh flybacksI received one of these and I'm going to use it to try and resuscitate an MS-2931. With the sizing issue, the HV might simply be a bit too low (lower HV produces a larger image due to reduced electron travel speed). With an HV probe, the HV can be tested.
Sorry to say this but both your tubes are trashed.Let us know how it goes. I sent my chassis out for repair and they replaced the flyback with one of these and when I got the chassis back it was causing arcing at the neck on both of my tubes.
I’ve seen that post but I have also gotten opinions from a few other people and it could be the chassis. Especially since the fly back was replaced.Sorry to say this but both your tubes are trashed.Let us know how it goes. I sent my chassis out for repair and they replaced the flyback with one of these and when I got the chassis back it was causing arcing at the neck on both of my tubes.
PSA: MS293X, faulty chassis can break the tube