Hatsune Mike
Champion
Yep, same tube type and chassis.Still an MS9 in both your E2@'Hatsune Mike'?
Yep, same tube type and chassis.Still an MS9 in both your E2@'Hatsune Mike'?
ppl that have never seen a Q25 picture and knock MS8s have no understanding about that chassis and tube combo at 25", its just a perfect match.The Q25 has a gorgeous picture though, and I found the big marquee deep inside.
Yeah, but that's /real/ high. Ha.Keep in mind PSU with no load will read high. With PCB will less.
The problem is how much the Egret II PSU varies under load. It may come as a surprise to those used to low-grade arcade power supplies, but very good power supplies do not have such variance under load.Keep in mind PSU with no load will read high. With PCB will less.
Isn't the stock E2 PSU from Wei-Ya?I don’t know what to tell you. I have many games where the E2 PSU can’t be adjusted down to 5V under load. Even with this NOS one, I’m only using it until I get another better PSU, and then this one is going back in storage. Maybe it belongs in the trash or a shredder or something.
Odd, mine is NOS and it def goes under 5v. My only problem with the E2 psu is it doesn’t have a strong 12v for older boards. Which is weird as I have some e29/canary ones and they have a very strong 12v. If you mainly play single boards it’s fine; stuff like salamander or splatterhouse I have to adjust the 5v up some, but it still works.I don’t know what to tell you. I have many games where the E2 PSU can’t be adjusted down to 5V under load. Even with this NOS one, I’m only using it until I get another better PSU, and then this one is going back in storage. Maybe it belongs in the trash or a shredder or something.
E3 later became stock weiya but taito made their own psu for E2.Isn't the stock E2 PSU from Wei-Ya?I don’t know what to tell you. I have many games where the E2 PSU can’t be adjusted down to 5V under load. Even with this NOS one, I’m only using it until I get another better PSU, and then this one is going back in storage. Maybe it belongs in the trash or a shredder or something.
We'll find out today. I closed off my little game room, put on a fan and opened the window after spraying mold killer stuff yesterday.How is the rotate mech on the Q25 @rewrite?
There’s no reason to change it unless you can’t repair or replace it. What do you plan to run that you’d need so much extra power?Alrighty then, I guess the next question is what connectors are needed if one was to replace the stock E2 PSU with a better one. The intent of course is to keep everything else all stock and unmodified.
I’ll pm you.So since mine is actually dead:
What connectors need to be ordered to build an adapter?
Remaining stock isn't worth a few hundred bucks to me.
That's not what I said at all.I love the comment above, if it works I’ll recap it, if it doesn’t I’ll replace it :lol: