What's new
By:

DARKSOFT Darksoft's MultiMVS Latest Firmware, Menu and Instructions

hi darksoft

Thank you for your message.

Motherboard mv2f consolized with universe bios 3.2 et mv2 original with original snk bios ( i've try with the two but it's the same)

ABOUT:
Firmware revision : 0x044e
firmware buil : 0xa160
top buil file: 0x35bb

Diagnostics:
FPGA STATUS : READY
BACKUP RAM ACCESS : OK
BACKUP RAM: OK
FILESYSTEM: OK
FILESYSTEM SIZE : 4MB
FILESYSTEM READ SPEED : 49152 B/S
FILESYSTEM WRITE SPEED : 44683 B/S
MENU ROM CHECKSUM : faf97a4d (write purple color)

Thank you by advance
Best regards
MARCOS
 

Attachments

  • IMG_20201127_190600[1].jpg
    IMG_20201127_190600[1].jpg
    579.4 KB · Views: 149
  • IMG_20201127_191614[1].jpg
    IMG_20201127_191614[1].jpg
    363.1 KB · Views: 167
  • IMG_20201108_101141[2].jpg
    IMG_20201108_101141[2].jpg
    371 KB · Views: 172
  • IMG_20201108_100743[1].jpg
    IMG_20201108_100743[1].jpg
    441.5 KB · Views: 165
  • IMG_20201108_100700[1].jpg
    IMG_20201108_100700[1].jpg
    299.3 KB · Views: 154
  • IMG_20201128_062650.jpg
    IMG_20201128_062650.jpg
    398.1 KB · Views: 163
  • IMG_20201128_063212.jpg
    IMG_20201128_063212.jpg
    434.4 KB · Views: 162
  • IMG_20201128_062723.jpg
    IMG_20201128_062723.jpg
    242.3 KB · Views: 161
  • IMG_20201128_062713.jpg
    IMG_20201128_062713.jpg
    310.9 KB · Views: 161
  • IMG_20201128_063247.jpg
    IMG_20201128_063247.jpg
    309.6 KB · Views: 160
Last edited:
I've never seen that error so it must be related to a bad contact. Did you check/clean them? Is your console working 100% with other games?
 
hi,
The mother board contact or the cartridge contact ?
I've not clean them but i have more of 50 original mvs games working perfectly.
I have 2 different mother board ( double slot mvs mv2 and mv2f , with same issues on the 2 mother board )
Thank you
 
Last edited:
I've try with with an arcade power supply 5v/15A 12v/2.5A
And with other one , a power supply than i use with naomi netdimm.

Maybe the MV2 and MV2F slot are not 100% compatible?

Which motherboard is the least problematic with darksoft multi mvs please?

 
Darksoft said:
@marcos that Firmware that you have is very old. Please update to the latest.

Are you using a microSD SDHC? It won't work with SDXC.
Click to expand...

I've update with the latest firmware and it's worst now .
i use a sdhc samsung 32 evo
 

Attachments

  • IMG_20201212_225300.jpg
    IMG_20201212_225300.jpg
    322.7 KB · Views: 147
  • IMG_20201212_231723.jpg
    IMG_20201212_231723.jpg
    266 KB · Views: 171
PascalP said:
Which PSU are you using? Have seen some issues in the past with consolized units with too weak PSU
Click to expand...
I've try with 3 different psu and always same issues:
 

Attachments

  • IMG_20201213_011023[1].jpg
    IMG_20201213_011023[1].jpg
    116.8 KB · Views: 152
  • IMG_20201213_011044[1].jpg
    IMG_20201213_011044[1].jpg
    113 KB · Views: 159
  • IMG_20201213_011057[1].jpg
    IMG_20201213_011057[1].jpg
    108.6 KB · Views: 167
Darksoft said:
@marcos that Firmware that you have is very old. Please update to the latest.

Are you using a microSD SDHC? It won't work with SDXC.
Click to expand...
update like this ?
first flash, mvs on for update,mvs off, i remove sd card.
2 top , mvs on for update , then mvs off , remove sd card .
3 remove cartridge, mvs on clear up backup nvram. put cpld for update and mvs on.

menu was already the last one (22 nov 2019)

But always full of graphics glitches.
I don't understand.
Maybe the cartridge have an issue, no ?
 
You can't mix menu and firmware versions. That's why they are given together. Put all files on the microSD and let it power cycle and finish the update.
 
Last edited:
I followed the instructions but when i place the new menu on a folder called “menu” inside \update the folder \menu inside \update was not deleted.
Something is wrong with my cartridge, i've buy on ebay ( the seller says it works perfectly.)
, this cartridge never worked properly on my two models mother boards (graphics glitches).
And he said i must use with a mv1fz.
My 2 slot mvs mv2 and mv2f working properly with original games.

Where can i see a correct video for updating this cartridge ?

i did the update on another sd card to keep the seller's sd card as i got it for safety. I copied his sd card to mine to update.
Maybe i must send it back to the seller ? What do you think ?

* i'm not a beginner in arcade, i have pcb game, mvs, cps1 cps2, igs pgm 1 and 2 , type x2 multi , naomi net dimm. all working perfectly at home.
I don't understand what's going on with this cartridge.
 
Last edited:
It should not be neccessary anymore but put the menu files into the games\menu folder, too. Maybe ist helps...
 
You must log in or register to reply here.
Back
Top