Pre-Order For Mini Cute Production

[meybarra]

What's the full weight of the cab in the crate? 60kg (132lbs)? I'm planning the haul my unit up a flight of stairs. I'm not the fittest guy, but I think I might be able to handle it with my hand truck. Let me know what you think.

 

[hursit]

The empty cabinet is about 50 kg
Crate is 15kg arount.
Total 65kg

 

[Derick2k]

What's the full weight of the cab in the crate? 60kg (132lbs)? I'm planning the haul my unit up a flight of stairs. I'm not the fittest guy, but I think I might be able to handle it with my hand truck. Let me know what you think.

Its not that bad, you can do it with a hand truck. specially since there is no tube in it cuts a little bit of weight. I could move the original ones solo, but it was just too awkward to carry. With a handtruck you should be fine, just strap it so it doesn't move on you.

 

[VGC1612]

i think you late for mini cute but never late for ISO harness

I saw a website with still some to order,probably been a while since it got updated i guess,If someone want to sale one of their,let me know

 

[hursit]

I saw a website with still some to order,probably been a while since it got updated i guess,If someone want to sale one of their,let me know

Yeha Japanarama forget to edit his website. I said to him last week to fix that.

 

[animesuperj]

Question on button sizes - what size are used for: player buttons, P1/P2 start and service?

 

[Kavas]

I wanna see someone actually using this thing. Then I wanna see someone playing it 2 player.

I wanna see two grown ass men playing on this thing.

 

[zero238]

I'm shy. I can't do it

 

[Kyotaro]

Question on button sizes - what size are used for: player buttons, P1/P2 start and service?

Player buttons: 30mm
P1/P2 start and service: 24mm

 

[animesuperj]

Player buttons: 30mm
P1/P2 start and service: 24mm

That's what I assumed, just wanted to double check.

 

[kikaso]

Player buttons: 30mm
P1/P2 start and service: 24mm

On original cabinets, 30mm screw-in Sanwa buttons don’t fit—too crowded—but screw-in Seimitsu buttons and all push buttons fit fine.

 

[Lemony Vengeance]

hey all, it's time. preorder thread for the ISO harness is below.
https://www.arcade-projects.com/thr...arness-for-the-tr-fightstick-mini-cute.18718/

 

[hursit]

STILL Waiting an Unboxing Video

 

[MudGuts83]

Tracked down a coin mech. Going after the iso transformer next. I can't recall, does the Mini Cute come with a coin counter (I did go for the added psu and controls)? If not, anyone have a mechanical model recommendation?

 

[dennisfxm]

Tracked down a coin mech. Going after the iso transformer next. I can't recall, does the Mini Cute come with a coin counter (I did go for the added psu and controls)? If not, anyone have a mechanical model recommendation?

I got a coin counter with mine. You should get one, too.

 

[MudGuts83]

Sweet.

 

[meybarra]

I was able to fit a 19" Kortek KTN-2001 monitor. The tube curvature is off, especially at the bottom of the bezel. But I think this will do for now.

 

[meybarra]

Flipping the bezel upside down helped with my Kortek's Samsung tube curve. The gap is much less noticeable when it's at the top of the screen.

 

[Fatalbazooka]

Pre order for europe is available from japanarama ??

 

[nem]

Pre order for europe is available from japanarama ??

Nope. The repro Cute is sold out.