- Thread starter Hammy
- Start date
mastercello
Enthusiast
Looks promising - please put me to the list! 
Added!Looks promising - please put me to the list!
Also list updated, some more are coming through this weekend, numbers 17/18 and maybe 19 expect pm's
Bit slower than expected to build but getting through them
i know im like #45 and probly not gonna get mine anytime soon, but im ready again if my number does come up
Don't forget that "other" stuff you were gonna send too@Kevas : Yours and @LHantz is going sunday hopefully
XtraSmiley
Legendary
HardAzRockz
Enthusiast
Hi, could you add me to the list. Thanks
XtraSmiley
Legendary
In my picture, is that the mask ROM that is closest to the EPROMs (center left)?Could be either.
Replace the 1 sprite mask rom to find out
@-Ace- dumped this mask rom version not long ago!
Big thanks to @Hammy for the awesome multi, and tech support. I had a couple bumps along the way but we were able to narrow it down to some bad programmed chips (more on that later).
As well as @twistedsymphony for the eprom burning advice. This was the first time I tried burning my own eproms, with a TL866ii-plus. For the most part it all worked out, except I was having trouble burning the SOUND eprom (27c322), and the PROMSEG (27c512). Thanks to @ShootTheCore for helping me with the SOUND eprom, as for the PROMSEG, I had to lower my VPP Voltage to 12.5 to get it to successfully program.
The result, working Jaleco multi!
This is running on a P-47 board that I got for $100 shipped. Not overclocked.
As well as @twistedsymphony for the eprom burning advice. This was the first time I tried burning my own eproms, with a TL866ii-plus. For the most part it all worked out, except I was having trouble burning the SOUND eprom (27c322), and the PROMSEG (27c512). Thanks to @ShootTheCore for helping me with the SOUND eprom, as for the PROMSEG, I had to lower my VPP Voltage to 12.5 to get it to successfully program.
The result, working Jaleco multi!
This is running on a P-47 board that I got for $100 shipped. Not overclocked.
5 Hour + session from @opt2not with the MMS1 , worth a watch if you have time
Waiting list updated!
I just did the easy 7mhz overclock on my board.
I got a little bit of improvement on some games. Big Striker works now, although slow. Previously at 6mhz it was not working.
EDF still has some slowdown especially when using the laser weapon, but Rodland felt good.
Next I want to overclock to 10mhz and see if I can get EDF to reduce the slowdown.
I got a little bit of improvement on some games. Big Striker works now, although slow. Previously at 6mhz it was not working.
EDF still has some slowdown especially when using the laser weapon, but Rodland felt good.
Next I want to overclock to 10mhz and see if I can get EDF to reduce the slowdown.
Last edited:
