What's new
By:
Filters

DARKSOFT Multi JVS v1.0

I have a question. If I replace a JVS IO board in a driving cab which has FFB with Multi JVS board, the FFB will still work, right?
 
Mitsurugi-w said:
Ok guys. I'm gathering the parts to finally do this run but I need to know generally how many units I need to manufacture. Also since it is my first time collecting parts I might doa presale for this batch. Please express interest in how many units you want. I will be doing these by hand so I want to make sure it is worthwhile. Sound off!
Click to expand...
I hate to be THAT guy but a quick summary of function would be very helpful..
 
You can configure the inputs and outputs declared in order to imitate other original i/os. This is goid because some games look for specific numbers. Also EVERY input is configurable. The real cool thing is you save profiles on the SD card that you can swap with the touch of a button.
 
Mitsurugi-w said:
You can configure the inputs and outputs declared in order to imitate other original i/os. This is goid because some games look for specific numbers. Also EVERY input is configurable. The real cool thing is you save profiles on the SD card that you can swap with the touch of a button.
Click to expand...
It'll work right out of the box correct?
 
Is there a way you can use this in a blast city cab? or just mainly for Racing Rigs?
 
It's designed to replace Sega JVS I/Os (Not JVS-to-JAMMA I/Os like capcom I/O). So a JVS cabinet such as a NNC would be a suitable home. I don't know much about Blast Cities tbh.
 
Anselmo said:
Is there a way you can use this in a blast city cab? or just mainly for Racing Rigs?
Click to expand...
Its not the same as the blast I/O. That I/O in the blast is to swap between Model 3 and Jamma with minimal effort.

The I/O he is selling handles controls/ect for JVS cabinets. If you had a Naomi/Net/New Net, it would be a drop in replacement for the I/O in those. IIRC a lot of deluxe cabs had those I/O's too and they're a total pain to repair.
 
Last edited:
For those of you looking to install into a Vewlix, I recommend commisioning @Lemony Vengeance to build a Sega JVS IO Vewlix G harness: connects a Sega JVS and MultiJVS IO board to the Vewlix CP Harness, and Test/Service buttons and coin mech/meter. You can use your existing J+K harness if available.

Alternatively you can go with PXLMod Taito Vewlix SEGA JVS I/O Adapter Kit and use the existing Taito Vewlix G harness

1666275591069.png


Both options are plug and play.
 
You must log in or register to reply here.
Back
Top