Here you go. The Trap Ketsui Arrange ready to burn to an 27C322.No problems, I'll leave it in your hands to track it down... cheers.
http://www.ikotsu.co.uk/Ketsui_Trap_Arrange_17.zip
Tested working on a Knights Of Valour 2 donor cart.
Here you go. The Trap Ketsui Arrange ready to burn to an 27C322.No problems, I'll leave it in your hands to track it down... cheers.
This is the Arrange version only doubled up to fit the EPROM size.awesome !
so this is a version where you can choose between vanilla et trap's 1.7 when you boot it ?
That's how the title screen looks.Also, is your monitor missing red or is that just the arrange mode title screen?
Hi.Here you go. The Trap Ketsui Arrange ready to burn to an 27C322.No problems, I'll leave it in your hands to track it down... cheers.
http://www.ikotsu.co.uk/Ketsui_Trap_Arrange_17.zip
Tested working on a Knights Of Valour 2 donor cart.
I have a willem GQ-3X but I wouldn't recommend getting one.What programmer do you recommend to write the eproms required for the conversion?
why it is not recommended?Here is a clean dump of the original AMB file.
www.ikotsu.co.uk/AMB_Ket_KA.zip
Ketsui is at offset 0x0
Ketsui Arrange is at offset 0x200000
Here is a pic of the cart. U14 & U15 look like they've been fucked with.
I have a willem GQ-3X but I wouldn't recommend getting one.What programmer do you recommend to write the eproms required for the conversion?
This worked just fine to change my AMB ketsui to Trap Arrange. Have not messed with the dual one yet.Here you go. The Trap Ketsui Arrange ready to burn to an 27C322.No problems, I'll leave it in your hands to track it down... cheers.
http://www.ikotsu.co.uk/Ketsui_Trap_Arrange_17.zip
Tested working on a Knights Of Valour 2 donor cart.
Because it requires adapters, jumpers and fly leads to program various devices. It also does not write GALs.why it is not recommended?
Good stuff. Is the shady jumper along U15?This worked just fine to change my AMB ketsui to Trap Arrange. Have not messed with the dual one yet.
My ketsui cart has a shady jumper running along a PIC that may touch a few legs. Honestly not sure how it should be but the cart has always worked so I don't dare touch it.
Ok. I see clearly why now. ThxBecause it requires adapters, jumpers and fly leads to program various devices. It also does not write GALs.why it is not recommended?
Nice, any pics of your install so we can see where you mounted the switch? Got a link to the switch you used?I've made a small diagram which should aid in installing a switch.
Can't try unless a dump of the program rom appears unfortunately.kuze said:Nice, I'm a bit surprised it fit like that on the underside.
Have you tried doing a switch for DDP DOJ WL / BL toggle?
Which one?Can't try unless a dump of the program rom appears unfortunately.kuze said:Nice, I'm a bit surprised it fit like that on the underside.
Have you tried doing a switch for DDP DOJ WL / BL toggle?