jamma

------------------------------------------- SOLD------------------------------------------- THE PUNISHER - ORIGINAL ARCADE JAMMA - CAPCOM CPS1.5 DASH - NEW BATTERY ORIGINAL BOARD (USA VERSION) WITH CASE, BOTH BATTERIES CHANGED LAST WEEK, COMES WITH METAL FEET. GAME CASE SHOWS SOME AGE...

Hi all, I recently purchase Rail Chase, which runs on the SEGA Y-BOARD hardware. The game is not JAMMA compatible and I'd like to create a Jamma harness for it (to run on my supergun). Does anyone have the pinout / Service manual of the game/boards?

only 60$ https://www.aliexpress.com/item/1005003504789880.html

tested and working konami gx system $200 + shipping

I have a KI1 jamma that fails to boot. When powered on it does the usual time to signify the sound hardware is OK but nothing further happens (the screen does get power however, same with the cabinet lights). The first thing I did was replacing the HDD (still had the original) with an SDD And...

Hi there! I recently purchased a revision 1 fighting pcb and I have the pot on the front of the IO Board and the jst connectors for sound and powering the amp. I am trying to get sound out of the board but the pin outs cia the manual are kinda hard to see… looks like power supply jst...

Looking to pick up a high quality JAMMA extension cable. The Arcade-Projects cable doesn’t seem to be available anymore so looking to see if someone has a spare to let go or an equivalent cable. I don’t have the skills to make my own cable. I need the cable to connect tall boards in my cabinet...

I've always loved these cab maintenance and restoration logs, so I figured it was my turn to contribute a bit! I've already done quite a bit of work on the cabinet and will be sort of 'backfilling' this thread with progress shots until it catches up to the present; here are a couple (potato)...

hi all, Do I actually need the driving board for the Daytona USA PCB for it to work or is it just for the force feedback purpose? Thank you,

Hello all, I've been working for some time on a SuperGun that will allow meto enjoy my few but selected arcade pcbs'. The idea was a simple,sleek design that will include several features such as:2 player support, S-Video support, kick harness support and internal PSU. Here are a few photos of...

Helloall, I've been working for some time on a SuperGun that will allow meto enjoy my few but selected arcade pcbs'. The idea was a simple,sleek design that will include several features such as: Not toocosty, 2 player support, S-Video support and a kick harness support. Hereare a few photos of...

JAMMA Video Standard The JAMMA Video Standard, or JVS, is an updated version of an earlier protocol standard simply called JAMMA. JAMMA is an analog protocol which became the standard connection scheme for almost all arcade machines built by Namco Bandai, Sega, Taito, Tecmo, Capcom, Konami and...

Hello everyone! I am missing the power wire that connects the main board to the sound board. Does anyone have one for sale or could possibly make me one? I tried using my MK1 and MK2 wires but the connections are different. Send me a PM. (Online image, not mine)

About The RECO is a PCB that connects in between your arcade cabinet/supergun and the JAMMA PCB game offering features such as on-the-fly button layout remapping, rapid-fire, 6 profiles to store your settings, and more. General JAMMA, JAMMA+ compatible Programmable button layout Programmable...

This is a 2011 DOS Aldine Gamebox (AKA Redbox) 400-in-1 Jamma multi-arcade. I upgraded the HDD to a $20 IDE SSD (DOM). Getting there wasn't simple, so I've documented the process below. I also upgraded its fans, ram, and processor along the way. Upgraded Specs RAM Original RAM: 2x128mb PC133...

Hi all. I've searched a lot, and found a lot. I'm trying to setup a genesis controller to use on my test station. I have the directionals working. But I can't get the buttons to work for the life of me. I would love for all 3 buttons, select and start to work! Have any of you ever gotten this...

Dear all, I'm building a supergun for the first time. I read about the fact that MVS has some sound issues when using a standard jamma connector. I got a wiring diagram from Google indicating some switches that are need to be used, it was not so clear to me. Please share your experience and...