CPS1 Multi. Official Thread

Mister fpga can do original resolution & be lag-free but can it or does it sound this good? (played on CPS1 Multi, sounds so good, recorded off-screen on phone).
https://imgur.com/a/pIfyCLc

*PS: Mister FPGA user for 7 years now
There's a solid reason I love original hardware.
Fpga can be a mixed bag depending on the programmer/how accurate it can be.
Original hardware just works.

There's nothing wrong with playing however is affordable as long as you are happy with it.
Nothing beats original though, imho, and I am very sensitive to bugs or glitches.
 
There's a solid reason I love original hardware.
Fpga can be a mixed bag depending on the programmer/how accurate it can be.
Original hardware just works.

There's nothing wrong with playing however is affordable as long as you are happy with it.
Nothing beats original though, imho, and I am very sensitive to bugs or glitches.
very well said!
 
Is this sd card ok for the Multi ?
Capture.JPG

8gb or 16gb Class 10 of others brands will cost the same
 
Is this sd card ok for the Multi ?
Capture.JPG

8gb or 16gb Class 10 of others brands will cost the same
I would imagine so.

I've lost count of the number of these exact cards I've bought; every flash cart/multi/ODE gets one of these as a bare minimum unless bigger capacity is required, and then I just buy a larger version of the same card.

Incidentally, anyone know of anything useful to do with those micro SD to full size SD adapters? I've got a drawer full of them... :D
 
I would imagine so.

I've lost count of the number of these exact cards I've bought; every flash cart/multi/ODE gets one of these as a bare minimum unless bigger capacity is required, and then I just buy a larger version of the same card.

Incidentally, anyone know of anything useful to do with those micro SD to full size SD adapters? I've got a drawer full of them... :D
Which one are you using with your CPS1 Multi?
 
Which one are you using with your CPS1 Multi?
I can't check my multi as I'm at work, but if I had to buy the card, that's what I will have bought. The multi kit might've come with a card, in which case I would've used that.

The speed of the micro SD card isn't critical to the functioning of the multi as it just gets read during the flash programming so you don't need a uber-ultra-mega class card, unlike say with an ODE where the disk image is constantly being streamed from the card. Literally any card big enough will work, I just buy those SanDisk cards as a baseline as they're cheap and work everywhere.
 

Hey @Darksoft - Tried to PM you after being directed to you by Mitsurugi, but never got a reply. Im looking for a replacement LCD selector for one of these/cps2/f3 multi's and wanted to know what the options were, as I couldn't find one at the stores.

Didn't know if they weren't available separately, or if I just wasn't looking in the right places.

Hope you can help sir.
 
Sorry, i haven't found a good answer to this:

Is there a "generally" acceptable default dip setting that works with most games in the basic USA roll-up pack? I don't really care about level select; mostly just attack mode sounds on and possible free play enabled. Basically I just want to 'set it and forget it' for the DIPs
 
Sorry, i haven't found a good answer to this:

Is there a "generally" acceptable default dip setting that works with most games in the basic USA roll-up pack? I don't really care about level select; mostly just attack mode sounds on and possible free play enabled. Basically I just want to 'set it and forget it' for the DIPs
All OFF is what works better. You can try to then activate the FREE PLAY for one game and see. I can't remember if FREE PLAY was the same dip for all games.
 
Back
Top