Mikonos told me the process requires offset printing for the metallic paint.
FS Egret 2/Windy 2/NNC/Q25 (Repair refund)
- Thread starter XeD
- Start date
For Sale
Hımm its good then. I couldn't find any offset machine that use Metallic silver paint. If they have, the process will be easier then screen printing. But offset means at least 200-500 pc.
If you look at his thread on UKVAC it says at the very top that he will not sell or give out his art files. And I can understand that given the time he put into them.
put me down for a set if it happens. thanks
Those who got egret 2’s, where are you looking to determine what kind of tube you have? I don’t see any obvious labels for the manufacturer on mine, though admittedly it is caked in pitch black crap and a label might be hiding somewhere...
Last edited:
Mikonos said if we get the ten sets of art claimed that they will cost 80 euro each.
Should I go ahead and start a group order/interest check for the art?
Should I go ahead and start a group order/interest check for the art?
I vote yes.
I'll take 2 sets at that price. And yeah, a separate owners' thread for Egret II stuff would be good.
If original it'll be a a Nanao MS9-29T with a Toshiba A68KJU96X tube.
There should be a label on the back of the CRT glass that looks like this.
http://2.bp.blogspot.com/-LaR1HOQ7gu4/TYxz40aQPkI/AAAAAAAABz0/mCXbWK0iQfI/s1600/DSC08092.JPG
BanishingFlatsAC
Champion
If he's willing to do a pair of the NNC leg decals, Im in for a set.
benime
Grand Master
same, I'd be down for a set of NNC side art.
I'd need NNC right side art (monitor facing you). Plus repro marquee with metallic print.
BanishingFlatsAC
Champion
I heard @alberto1225 did a small run of the marquee awhile back and they looked amazing. I was lucky enough to score a real one from @Derick2k for a good price awhile back.
Typing this, I just remembered I owe @alberto1225 some panel measurements. I'll get them for you tonight sir!
alberto1225
Professional
The repro works I did for NNC are 1P/2P panel and the insert strip. I don't make the marquee as the original marquee looks so great and it's still not that hard to get one.
LaTraille
Student
Would you have an idea where we could get one? I’ve looked around and came back empty handed. Mikonos was quoting 56 Euros for his repro and I was about to order it... thanks!
alberto1225
Professional
here
https://videotronicsuk.com/
Contact them. I saw they had some marquees last year. It's good place to find NNC parts. The postage seems good too.
LaTraille
Student
Thanks! Actually ordered a NNC manual and PCB wooden board from them last month but didn’t think about asking for a marquee... I’ll try that...
anyone get around to recapping their egret ii psu? I just opened mine up (more pics https://imgur.com/gallery/9Yqf90E) and found one pin totally unsoldered. It was working fine so I assume this is just an anchor for the big component on the other side, but thought I’d ask in here if anyone else has gotten to this. Is yours also like this?