same, I'd be down for a set of NNC side art.
- Thread starter XeD
- Start date
For Sale
I'd need NNC right side art (monitor facing you). Plus repro marquee with metallic print.
BanishingFlatsAC
Champion
I heard @alberto1225 did a small run of the marquee awhile back and they looked amazing. I was lucky enough to score a real one from @Derick2k for a good price awhile back.
Typing this, I just remembered I owe @alberto1225 some panel measurements. I'll get them for you tonight sir!
alberto1225
Professional
The repro works I did for NNC are 1P/2P panel and the insert strip. I don't make the marquee as the original marquee looks so great and it's still not that hard to get one.
Would you have an idea where we could get one? I’ve looked around and came back empty handed. Mikonos was quoting 56 Euros for his repro and I was about to order it... thanks!
alberto1225
Professional
here
https://videotronicsuk.com/
Contact them. I saw they had some marquees last year. It's good place to find NNC parts. The postage seems good too.
Thanks! Actually ordered a NNC manual and PCB wooden board from them last month but didn’t think about asking for a marquee... I’ll try that...
anyone get around to recapping their egret ii psu? I just opened mine up (more pics https://imgur.com/gallery/9Yqf90E) and found one pin totally unsoldered. It was working fine so I assume this is just an anchor for the big component on the other side, but thought I’d ask in here if anyone else has gotten to this. Is yours also like this?
it looks like it's not soldered because that through-hole isn't plated... nor does it route to any traces
Mrhide
Enlightened
Wwait... you ordered a wooden board? from across the pond?!
Sure did! I like it original as much as possible and the board inside my NNC was more mold than wood...Wwait... you ordered a wooden board? from across the pond?!
They confirmed that they were out of marquees for NNC
SO Im in the process getting parts for the E2 cab. Anyone replace their speakers? Any drop in replacements or upgraded speakers maybe with an amp. Anyone have links to any of this?
If I cant find any, I might just replicate the enclosures with better drivers in them and build a sub box as well and mount a small amp to drive them all. hell might as well build it into the back panel since its make out of mdf.
If I cant find any, I might just replicate the enclosures with better drivers in them and build a sub box as well and mount a small amp to drive them all. hell might as well build it into the back panel since its make out of mdf.
Curious about this one.
anyone get around to recapping their egret ii psu? I just opened mine up (more pics https://imgur.com/gallery/9Yqf90E) and found one pin totally unsoldered. It was working fine so I assume this is just an anchor for the big component on the other side, but thought I’d ask in here if anyone else has gotten to this. Is yours also like this?
Taito PSU from my Egret II is a different model (M4100023B):
How many different Taito PSU models are out there for Egret II cab?
PD: I also created a list of caps used on this PSU model on AO wiki:
https://wiki.arcadeotaku.com/w/M4100023B
There are two, one is open, one is closed. Closed is the older one IIRC.
They're functionally the same, nothing to worry about no matter which you have.
Ok, here are the pics of the tube and some bad pics of the chassis. This came off a US Tekken 5 cab.
As you can see, the tube is completely flat. I have two more just like this in Maximum Tune 2 cabs.
And here you can clearly see it is marked as 29E31S.
About to put in the swap. Should be done by the end of the week.
You guys are sure this can go into the Toshibe tube? I see dual focus beam adjustments on the yoke.
Attachments
The pots at the top of the yoke? Don't worry about those. The tube is single focus.
