People on the wait list get the first dibs. If I end up with surplus, it will be available for everyone else.YESI hope I am here. What's this PS2 dapter? For RGB output? Can we order it?
Home Arcade System
- Thread starter RGB
- Start date
PascalP
Legendary
Yes, can’t wait 
zizer
Beginner
+1 mini din to vga adapter
+1 ps2 adapter
+1 ps2 adapter
J
jassin000
Uh... Homie the PS2 adapter is for connecting a PS2 SCART cable.
Don't you have PVM's/BVM's?
If so, I highly recommend you buy only the HD15 adapter for the HAS and use a VGA-to-BNC cable to drive the monitor(s).
Leave the 5th BNC (normally VGA pin #14 ie V-sync) disconnected.
Don't anyone go getting fancy ideas, like for example you are going to go buy a PS2 component cable for use with this.
This is only a connector, it will not convert into the YPrPb component format required (you would need an external device for this).
IT'S ONLY FOR a PS2 SCART cable.
Last edited by a moderator:
AlxUnderBase
Enlightened
I want a Ps2 adapter too sir ! Please keep 1 for me too ! 
Yeah, thats what I need, never got around to getting those.Uh... Homie the PS2 adapter is for connecting a PS2 SCART cable.Don't you have PVM's/BVM's?If so, I highly recommend you buy only the HD15 adapter for the HAS and use a VGA-to-BNC cable to drive the monitor(s).
Leave the 5th BNC (normally VGA pin #14 ie V-sync) disconnected.
Don't anyone go getting fancy ideas, like for example you are going to go buy a PS2 component cable for use with this.
This is only a connector, it will not convert into the YPrPb component format required (you would need an external device for this).
IT'S ONLY FOR a PS2 SCART cable.
PascalP
Legendary
Get a CRT Projector, then you will need those
J
jassin000
I've got you... PM'd
Gotta move to a bigger house 1st , I want to have a proper media/entertainment room.Get a CRT Projector, then you will need those
Max_Power
Student
Dam... I didn't revive a PM ... looks like I will be in the next batch 
RetroRGB
Student
- Joined
- Jul 21, 2015
- Messages
- 40
- Reaction score
- 69
The fact that the HD15 adapter has a csync / TTL jumper is amazing. Little things like that make such a big difference in people's setups!!! I'd usually leave it on csync, but one of my capture cards and some Extron equipment I use requires TTL and its nice to know it;s just a jumper swap away!
CoinFeeder
Professional
@RGB: What's the recommended setup to connect two devices (OSSC + PVM) to the HAS, e.g. when you wanna play on your PVM but stream via OSSC/capture device? I'm pretty sure a VGA splitter cable will work, but not sure the HAS is designed for handling that. Would you rather recommend an component/splitter?
geosnow
Enthusiast
You do not need an OSSC for the PVM.
OSSC is only for non CRTs.
OSSC is only for non CRTs.
I don't think you understood what he was asking.
He wants to play on a PVM, and stream from the OSSC at the same time.
@CoinFeeder I use a matrix switch for this set-up. I have a Shinybow 6x2 SCART matrix switch that works perfect for this situation. My HAS/Consoles are plugged into the Shinybow, one output to my PVM, while the other output is connected to my upscaler attached to my capture card.
The shinybow is a bit expensive, but there might be other options out there that are cheaper.