What's new

Home Arcade System

I take the same.
I receved my kit today.... :D :D :D ....I have all....except my power cord cable.... ;(
s-l500.jpg
 
RGB said:
@hardyhell - There really is no problem with this PSU. Every PSU requires meeting minimal load specifications. The problems with your setup might come from something else - unless you loaded the PSU as I told you and it solved it.

Like I explained, you connect the PSU to just the HAS and the JVS I/O, which combined MAYBE require 200-300mA? That's too little and you need to load the PSU a bit more by adding a cement resistor between the +5V and GND.
Click to expand...
thank you again.

i understood all of that and it is really great that you help out in that way.

personally i would still prefer a PSU where i won`t have to put my Hands on and mod it.and i think other People run risk to hate the same Problem with the same Setup.

one important question still...the the resistor is only needed if i continue to use the naomi with my supergun?for all other pcb it is ok to let it be like it is?

Thanks
 
hardyhell said:
one important question still...the the resistor is only needed if i continue to use the naomi with my supergun?for all other pcb it is ok to let it be like it is?
Click to expand...
Speaking from my experience, I never had to additionally load it when I used the JAMMA PCBs (even the MV-1C).
 
RGB said:
hardyhell said:
one important question still...the the resistor is only needed if i continue to use the naomi with my supergun?for all other pcb it is ok to let it be like it is?
Click to expand...
Speaking from my experience, I never had to additionally load it when I used the JAMMA PCBs (even the MV-1C).
Click to expand...
thank you very much.so there will be no danger for the other jamma PCB.
 
Hi,
just received my HAS yesterday! I'm away for work but very excited to test when I get back :-)
Very happy! Thanks RGB!

Now I just need proper RGB cable for CRT\Framemeister. ^^'
Any suggestions? Links would be very appreciated. :-)

EDIT: about power supply, I'll buy the HAPP (should work with 200v europe plug)
 
Guys, please check your email, I've just sent you the instruction manual, hope it doesn't get blocked.

Edit: This is embarrassing, the manual contained a silly mistake in the text (very important text about NOT letting your children and animals get anywhere near your arcade setup :D). I've just re-sent you the corrected manual.

Edit2: Looks like I rushed the manual, there are some other stupid grammar mistakes still there, but I hope it's more or less understandable.
 
Last edited:
pedroTFP said:
Thanks.
Well, nope, about the cable I mean something like this (it was linked in Smokemonster supergun video): https://retro-access.com/products/n...-stereo-rgb-scart-lead-for-rgb-upgrade-boards (mini DIN8, no components inside)

Besides, is there any chance to get a HAPP supply from europe in order to get shorter delivery time?
Click to expand...
I purchased this one comes assembled. I have not tried it yet still waiting on my HAS to arrive.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/202428443288
 
KingSopz said:
pedroTFP said:
Thanks.
Well, nope, about the cable I mean something like this (it was linked in Smokemonster supergun video): https://retro-access.com/products/n...-stereo-rgb-scart-lead-for-rgb-upgrade-boards (mini DIN8, no components inside)

Besides, is there any chance to get a HAPP supply from europe in order to get shorter delivery time?
Click to expand...
I purchased this one comes assembled. I have not tried it yet still waiting on my HAS to arrive.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/202428443288
Click to expand...
Works great, it's exactly what I was using as well with my setup.
 
@RGB question on the ps2 adapter. Would the HD retrovision ps one adapter with accompanying component cable be compatible?
 
Is it okay to have a small gap between the HD15 adapter PCB and the AUX connector? In other words, the pins don't go all the way inside the header.
Maybe I used the standoffs wrong?

edit:
Don't worry about the manual, the most important thing - at least to me :) - are the pinouts, which are super clear.

Another thing I was wondering: When making a video only cable like jassin000 suggests in the Scart cable thread (with audio on an extra cable)
do I connect Audio GND to anything on the Scart connector or not?

edit2:
If I want stereo sound I have to get it from the PCB (ST-V, CPS2, Konami GX, ... I think?) or the JAMMA edge (Neo Geo), right? I would then just use an external audio attenuator instead of the one on the HAS.
 
Last edited:
KeeseMan said:
Another thing I was wondering: When making a video only cable like jassin000 suggests in the Scart cable thread (with audio on an extra cable)
do I connect Audio GND to anything on the Scart connector or not?
Click to expand...
Nope, I only use the SCART head for video connections (specifically Red, Green, Blue, Sync, ground with one additional ground to the cable shield).
All audio connections are passed to my OSSC via 3.5mm jack/cable.

I recommend this because I get less noise/interference this way.
With everything present in the SCART head when displaying a solid white screen I hear a slight audio hmmm.
 
Guys, I'm away for 3 days, I will only check forums on my smartphone and will try to reply to most urgent questions, but most likely will wait with everything else till Monday/Tuesday.

I shipped all orders that were paid before 28.11, will send you tracking numbers on Monday.

Thanks,
-RGB
 
Last edited:
You must log in or register to reply here.
Back
Top