What's new

Home Arcade System

I can't remember if I ever added my name to any list for one of your devices... is there a way to check or how should I proceed if I am still interested and haven't? Thank you so much!
 
namdor said:
I can't remember if I ever added my name to any list for one of your devices... is there a way to check or how should I proceed if I am still interested and haven't? Thank you so much!
Click to expand...
The preorder foarm is here ( https://homearcadesystem.wordpress.com/pre-order/ ) . Maybe if you visit this page you will remember if you completed the preorder list . If not , you will must send a message to RGB to know more about what you want to do further to grab a HAS unit. Cheers.
 
KingSopz said:
RGB said:
Pre-order is open :)
Click to expand...
I just pre order again :)
Question when will you sent out the email for the current batch , i got the first email to confirm purchase but still waiting on the payment email.
Click to expand...
Thanks! All I can say is soon. It's not a secret or anything, it's just that I'm crazy busy with my regular job and it's tough to find time for anything else.
 
Hey @RGB is the "unavailable" status for the 3P4P adapter PCB correct? Would love to pick one up with the CPS2 harness if possible!
 
RGB said:
Thanks! All I can say is soon. It's not a secret or anything, it's just that I'm crazy busy with my regular job and it's tough to find time for anything else.
Click to expand...
no worries i was just making sure i did not delete the email from my junk mail or something. No rush thanks.
 
I also pre-ordered last year (?) or something similar and received the pre-order confirmation to see if I was still interested a few weeks ago. I'm assuming I'm still on the list :)
 
I have reserved the money for the payment since I received the first email :P .

I want my HAS, I can not wait to connect my CPS2 and Neo Geo MV1C .. 8o
 
I preordered awhile back but fell on difficult times. But this time around I’m ready and have everything set for the HAS.

I put myself down for:

HAS unit 1x
Capcom CPS2 Kickharness 2x (not sure if this is the same for Naomi and the Capcom I/O Converter)
Saturn Adapters 2x (I know it’s very limited but I’m hoping I’m in for them!!!)
HD15 to VGA for OSSC 1x (still not sure for this)

I have an Atomiswave with HNK and RF2 along with a Naomi with MvC2 and CvS2. Although I’m currently lacking a Dimm board and GD Rom Drive. I got my Capcom I/O Converter in yesterday so I’m quite excited.
 
I've just jumped on the recently re-opened pre-order, very excited!

I wondered if someone could clear something up for me. What would be the use case for the "8pin mini DIN to HD15 adapter PCB"? The description seems almost identical to the "HD15 adapter PCB" above it. Does it work in conjunction with this item? Looking at the pictures it looks like it converts the added VGA port back to a 8pin DIN, what would the advantage of this over the one on the base board? I've likely missed something very simple, apologies in advance!

Also, does the HD15 adapter PCB fit underneath the plexiglass case of the HAS, or does this need to be removed to use it?
 
Otaku Punk said:
I've just jumped on the recently re-opened pre-order, very excited!

I wondered if someone could clear something up for me. What would be the use case for the "8pin mini DIN to HD15 adapter PCB"? The description seems almost identical to the "HD15 adapter PCB" above it. Does it work in conjunction with this item? Looking at the pictures it looks like it converts the added VGA port back to a 8pin DIN, what would the advantage of this over the one on the base board? I've likely missed something very simple, apologies in advance!

Also, does the HD15 adapter PCB fit underneath the plexiglass case of the HAS, or does this need to be removed to use it?
Click to expand...
framemeister uses the mini din for RGB input and yes, you use it with the VGA hat. I haven't seen the new model, but I assume the native output you are referring to on the HAS is S-video, not mini din. I could be wrong of course. in the description, there is also the case for Taito F3 and scart issues.
 
Otaku Punk said:
I've just jumped on the recently re-opened pre-order, very excited!

I wondered if someone could clear something up for me. What would be the use case for the "8pin mini DIN to HD15 adapter PCB"? The description seems almost identical to the "HD15 adapter PCB" above it. Does it work in conjunction with this item? Looking at the pictures it looks like it converts the added VGA port back to a 8pin DIN, what would the advantage of this over the one on the base board? I've likely missed something very simple, apologies in advance!

Also, does the HD15 adapter PCB fit underneath the plexiglass case of the HAS, or does this need to be removed to use it?
Click to expand...
maybe ... you want to use your HAS unit through OSSC or not, on an old phat pc monitor or an PC monitor with VGA plug.
 
AlxUnderBase said:
maybe ... you want to use your HAS unit through OSSC or not, on an old phat pc monitor or an PC monitor with VGA plug.
Click to expand...
I think the confusion is between "HD15 adapter PCB" and "8pin mini DIN to HD15 adapter PCB". They have very similar names and descriptions. Do they do the same thing? Why would you purchase one over the other?
 
You must log in or register to reply here.
Back
Top