What's new

Home Arcade System

RGB said:
I've got some bad news - next week I'll undergo a minor operation and this will affect the delivery of the next HAS batch, I won't be able to work for good 3 weeks (however I think I might be able to continue shipping the pre-orders) :(
Good news is that I should finally have the JAMMA extension harnesses ready in the first week of February.
Click to expand...
Oh no, sorry to hear that, Michael! I hope you have a speedy recovery, and get time to rest and heal. Take your time, man. This hobby stuff should come second to life stuff. Always. :thumbup:
 
RGB said:
xtrasmiley said:
This forum isn't about ripping people off or making them waste money unnecessarily, even at the profit of one of our own. It's about helping people and creating cool products.
Click to expand...
^ This. Of course I want to sell the HAS, but not at all costs. In this case my recommendation would be to start a fresh thread and to look for somebody in the UK who could test the board for you, you will save money and time
Click to expand...
Exactly that!

RGB said:
I've got some bad news - next week I'll undergo a minor operation and this will affect the delivery of the next HAS batch, I won't be able to work for good 3 weeks (however I think I might be able to continue shipping the pre-orders)
Click to expand...
Get well. We want to see you back at work :thumbup:
 
  • Like
Reactions: RGB
Is there anyway to disable button 4/5 on the HAS v4? I tried holding down button 4 (LK) on my undamned converter on a brooks UFB arcade stick/snes2jamma adapter on powerup and no dice. Am I just holding the wrong button? Trying to fix the vampire savior raging demon inputs.

I've tried a PS4 controller through undamned decoder as well. It works fine if I plug in a neo geo controller and hold button D.

Thanks.
 
Last edited:
Try other button, the mapping must be off. You can also install a jumper to disable buttons 4/5 (more info in the instruction manual).
 
How easy is it to setup and run a game on a HAS for a complete beginner? (I don't have any arcade hardware yet pcb's etc. but for future ref) Is it plug in and play and How much extra stuff do you need to get it running if its not? Thanks! Also best of luck with the surgery and recovery @RGB
 
tofa said:
How easy is it to setup and run a game on a HAS for a complete beginner? (I don't have any arcade hardware yet pcb's etc. but for future ref) Is it plug in and play and How much extra stuff do you need to get it running if its not? Thanks! Also best of luck with the surgery and recovery @RGB
Click to expand...
It is very easy to setup and use (but it is recommended to have a minimum of skills later to debug if needed)
It is plug & play
For extra stuff you need :
PSU with cables
Video cable (RGB cable for example)
Controllers
Your game (PCB - JAMMA)

That sould be fine to begin
 
Yippikaye said:
tofa said:
How easy is it to setup and run a game on a HAS for a complete beginner? (I don't have any arcade hardware yet pcb's etc. but for future ref) Is it plug in and play and How much extra stuff do you need to get it running if its not? Thanks! Also best of luck with the surgery and recovery @RGB
Click to expand...
It is very easy to setup and use (but it is recommended to have a minimum of skills later to debug if needed)It is plug & play
For extra stuff you need :
PSU with cables
Video cable (RGB cable for example)
Controllers
Your game (PCB - JAMMA)

That sould be fine to begin
Click to expand...
You also need an RGB monitor or OSSC/Framemeister.
 
rsignal said:
Just read the awesome manual: https://homearcadesystem.wordpress.com/instruction-manual/
Click to expand...
Thanks! Missed that earlier.
the Goat said:
You also need an RGB monitor or OSSC/Framemeister.
Click to expand...
forgive the dumb question but what’s an RGB monitor?
Yippikaye said:
tofa said:
How easy is it to setup and run a game on a HAS for a complete beginner? (I don't have any arcade hardware yet pcb's etc. but for future ref) Is it plug in and play and How much extra stuff do you need to get it running if its not? Thanks! Also best of luck with the surgery and recovery @RGB
Click to expand...
It is very easy to setup and use (but it is recommended to have a minimum of skills later to debug if needed)It is plug & play
For extra stuff you need :
PSU with cables
Video cable (RGB cable for example)
Controllers
Your game (PCB - JAMMA)

That sould be fine to begin
Click to expand...
ok, good to know. Definitely gonna get one as soon it’s available. Thanks
 
You must log in or register to reply here.
Back
Top