Home Arcade System
- Thread starter RGB
- Start date
So, now I just need to watch this page: https://homearcadesystem.wordpress.com/pre-order/
Is it still the correct place?
Edit: I'll take that as a yes! Thanks, RGB!
Is it still the correct place?
Edit: I'll take that as a yes! Thanks, RGB!
Last edited:
BroadwayJose
Professional
Me too, I guess... and I'll also check regularly here https://homearcadesystem.wordpress.com/pre-order/
Thanks for the update RGB
Me too +1
Therapist3s
Beginner
Happy to see these! I am interested in one!
Chacranajxy
Student
I'm running into an issue playing Dodonpachi on my HAS 3.1 - no video output. I've got the HAS hooked up to an OSSC via SCART, and am getting a NO SYNC message on AV1. Audio and the controls are working fine - just the video output that isn't playing nicely. Oddly, my Guwange board works just fine.
Anyway, is there some trick to getting the game to play nicely with these devices that I should be aware of?
Anyway, is there some trick to getting the game to play nicely with these devices that I should be aware of?
GamingDoyle
Student
Replying here as well to get notifications. Did I miss the latest order window?
hallucid
Enthusiast
Hey Mike also interested in 2.
please let us know a date if possible
please let us know a date if possible
ChuChu Flamingo
Enthusiast
@RGB
So I just got a Hyper Neo 64 and have a question about getting stereo from it.
Jamma nation list this about these two switches.
"To put the Hyper 64 in MVS mode simply flip SW1 to MVS. For MVS 2 channel sound flip SW3 to 2ch/MVS. If you do not flip SW3 to MVS then you will have an MVS pinout with jamma mono sound which will not produce sound in a cab wired for MVS."
What settings would I need to have stereo sound going through the Hyper Neo Geo 64 on my HAS?
If im reading this correct switch 1 would make it behave like a non-jama mvs board. Flipping switch 3 would make it pass stereo through the jamma connector like some mvs boards do.
tl;dr I just want stereo out of the Hyper Neo 64.
1.)I assume I need to have SW3 set to 2Ch, SW1 set to MVS, and on the HAS set the sound switch from JAMMA to MVS.
2.)In theory wouldn't I get stereo sound out of H64 through the HAS if I set SW3 to 2CH, SW1 to Jamma pinout, and leave the HAS switch to Jamma instead of MVS? Would be a lot more convenient since most of my boards are jamma except my 1 slot mvs.
So I just got a Hyper Neo 64 and have a question about getting stereo from it.
Jamma nation list this about these two switches.
"To put the Hyper 64 in MVS mode simply flip SW1 to MVS. For MVS 2 channel sound flip SW3 to 2ch/MVS. If you do not flip SW3 to MVS then you will have an MVS pinout with jamma mono sound which will not produce sound in a cab wired for MVS."
What settings would I need to have stereo sound going through the Hyper Neo Geo 64 on my HAS?
If im reading this correct switch 1 would make it behave like a non-jama mvs board. Flipping switch 3 would make it pass stereo through the jamma connector like some mvs boards do.
tl;dr I just want stereo out of the Hyper Neo 64.
1.)I assume I need to have SW3 set to 2Ch, SW1 set to MVS, and on the HAS set the sound switch from JAMMA to MVS.
2.)In theory wouldn't I get stereo sound out of H64 through the HAS if I set SW3 to 2CH, SW1 to Jamma pinout, and leave the HAS switch to Jamma instead of MVS? Would be a lot more convenient since most of my boards are jamma except my 1 slot mvs.
Last edited:
