DARKSOFT Multi JVS v1.0
- Thread starter Darksoft
- Start date
How well did this setup work for you? Did you make 5v cable yourself?Finally got around to hooking up and testing things. I powered with only 5v via usb and I’m just using it outside of a cab with ringedge 2 on default profile with a db15 controller. All seems great so far. Thanks guys!
Is this correct? Thinking of using this adapter.
Last edited:
I might be able to whip up some acrylics cutouts for these, let me know what you are thinking and I'll make something up when I run other stuff Im cutting out for another project.
Btw these are awesome I have 2 installed in 2 of my cabs basically permanently.
Awesome I'll work on something shortly. Woot woot!
@Derick2k Here's a simple Acrylic Top and Bottom covers. Allows access to plug in wiring harness. 4 (5V) and 5-Pin (12V) Power cables are flexible enough to fit under the top cover. We can adjust height with appropriate Standoff sizes that clear JVS and DB15 connectors. Stand-offs should also be tall enough to stick your finger to make adjustments to Menu, Reset, Test, and Service. Users can drill holes on the top cover and 3D-Print push buttons if they want a lower cover.
I have some Brass Space stand-offs on the way to see which one works best. We might be able to get a kit with sku's for anyone that wants to build a kit.
I have some Brass Space stand-offs on the way to see which one works best. We might be able to get a kit with sku's for anyone that wants to build a kit.
Got it, also meant cutouts for the 2 power connectors?! 5v / 12v?
We're OK with no cut outs for the power connectors.
Did some test cutouts, will nail it down tomorrow or the next day.
This is going to be awesome! Looks great!
Deciding whether to do any engraving on it or not.
Brass M4x20mm (Top) + M4x5 6mm (Bottom) Stand-offs are here. USB Power Cable. Just waiting on the finalized panels for fitment.
Tripp Lite USB 2.0 to USB Motherboard 4-Pin Adapter. I removed the data pins. This is important otherwise your MultiJVS will not power on properly and RISK destroying it. Be careful!
Pay attention to the 5V and Ground!
Removed the Data pins and folded them down with a heatshrink to keep it nice and tidy. You could snip them off.
Heashrink done and clean!
Tripp Lite USB 2.0 to USB Motherboard 4-Pin Adapter. I removed the data pins. This is important otherwise your MultiJVS will not power on properly and RISK destroying it. Be careful!
Pay attention to the 5V and Ground!
Removed the Data pins and folded them down with a heatshrink to keep it nice and tidy. You could snip them off.
Heashrink done and clean!
Last edited:
A few more tweaks and it should be done.
Stunning!!!!!!