Name that connector: the thread

[FrancoB]

Should just need a generic 3x2 dual row 2.54mm pitch housing and pins. Something like [this].

 

[gamezer0]

Should just need a generic 3x2 dual row 2.54mm pitch housing and pins. Something like [this].

That looks like what I need. Thanks!

 

[advans14]

Got a couple. Think i know the answer to one. First one. Crimps the grounds together .Hoping to get close to authentic as possible

Second snaps over the terminals qd.

 

[kazuo]

Not OEM, but those caps are just closed end crimp terminals:
https://www.amazon.com/Nilight-Closed-Terminal-Connector-Warranty/dp/B07T1H6N82/

They're pretty similar to the twist caps you see used on like electrical wiring in homes.

The QD covers are made by Sanwa I think:
https://focusattack.com/sanwa-sr-110-quick-connect-enclosure/

 

[advans14]

yup i agree. thanks!

 

[FrancoB]

Does anyone recognise this connector series or maybe know where to look?

It's the connector for the navigation button on a LG 32GN550 monitor.

Looks to be to be 1.1mm pitch. I've had a look at the JST catalogue in and around the 1.1mm pitch section but I can't see anything that looks the same. Also tried TE connectivity and Molex but they don't seem to have anything in 1.1mm.

 

[9999 Damage]

Does anyone know where can I source Sony's AV multi out female connectors other than salvaging it from junk playstations?

Maybe some kind of extension cable? The SCPH-1160 has an AV Multi Out for pass-through, and it looks like they're fairly inexpensive.

 

[tiff_lee]

Maybe some kind of extension cable? The SCPH-1160 has an AV Multi Out for pass-through, and it looks like they're fairly inexpensive.

Definitely looks like the best option seeing as it is a proprietary sony connector.

The PS1 was made in the era when sony still put out quality service manuals, referencing this one
https://archive.org/details/PlaySta...al_3rd_Edition/page/n19/mode/2up?view=theater
CN502 1-779-029-11 connector square 12P, searching that part number yields no results
https://connector.pinoutguide.com/12_pin_Sony_Playstation_special/

 

[ItsBobDudes]

I’m looking for the RGBS connectors for nanao chassis. Mainly 2931. I think the same connector is shared with 8-26, 9-29, 2930, 2933. Can anyone confirm?

 

[kazuo]

Gonna need an ID on this. Came from one of the HV connectors on a MS9 chassis. Crimped with 22 AWG wires.

Edit: Found! https://www.arcadepartsandrepair.co...-connectors/2-pin-plug-housing-2-36mm-cm1001/
Can anyone let me know if Digikey/Mouser has a product page for these. The link above is quoting me $70 shipping from US to Canada for a connector LOL

Edit 2: Another source: https://www.ebay.ca/itm/173869421484

On the off chance that you still need this, PM me, happy to forward it along for you (at a reasonable price lol).

 

[Ziggy Cheetos Dust]

T

I’m looking for the RGBS connectors for nanao chassis. Mainly 2931. I think the same connector is shared with 8-26, 9-29, 2930, 2933. Can anyone confirm?

The manual shows them as a B6B-EH connectors. So searching your local supplier you should be able to find the female connector type in the JST range.

 

[Ziggy Cheetos Dust]

I’m looking to make an adaptor for the demag connector on the Windy II to fit a 2931. I already bought some adaptors from France ebay but they didn’t include everything I need. If I can buy the parts locally I’d like to make one of these if anyone knows what the parts on each end are?

 

[nem]

If you don't mind buying from the US, I think the plug housing is this one:

https://www.arcadepartsandrepair.co...-connectors/2-pin-plug-housing-2-36mm-cm1001/

Pins for it are here:

https://www.arcadepartsandrepair.co...-pins-female-18-24-awg-10-pack-cm1006-cp1011/

Double check with a caliper.

The store also sells headers, but that you'll have to measure yourself.

 

[nem]

Oh, that's too bad. How about ordering from JST in Japan?

https://www.jst-mfg.com/product/index.php?series=162

https://order.jst-mfg.com/InternetS...select=a&show=top&search=top&view=ProductList

 

[Ziggy Cheetos Dust]

Thanks @nem that’s got me well on the way.

 

[Ziggy Cheetos Dust]

Can I have some help to ID these please - connector and pins for CN102 on an MS9 chassis!

S JST is written on one tab and IB is written on another. The pins protrude through the bottom of the connector and are soldered straight into the board.

Thanks in advance.

 

[FrancoB]

They're part of [JST EH Series].

Looks to actually be [JST SCN] series.

Edit #2: I was incorrect, correct series is SAN as below:

I ordered an SCN and the pitch was too big. My mistake. It’s actually an SAN connector.

 

[FrancoB]

My apologies, I've got a bit ahead of myself pre morning coffee.....

I don't think those solder contact type are part of the EH series, or at least they're not in the data sheet. I imagine they would work as a replacement but I'll see if I can find those exact ones for you.

 

[FrancoB]

Looks to actually be [JST SCN] series.

Edit: I was incorrect, correct series is SAN as below:

I ordered an SCN and the pitch was too big. My mistake. It’s actually an SAN connector.

 

[Ziggy Cheetos Dust]

Looks to actually be [JST SCN] series.

Thanks @FrancoB. I owe you a beer. I couldn’t find it for the life of me.