UPDATE! New site for HSS. New URL has an extra "s" at the end of the name, so now is www.highscoresaves.com
DARKSOFT New Namco System 2 Multi
- Thread starter Darksoft
- Start date
A small update for everyone who preordered this multi. We still have a few units left. I've made some small changes that I'm sure that you will all like.
We are still good to ship at the end of September but it's going to be rather at the end of the month. I'm sure you are going to like it!!
We are still good to ship at the end of September but it's going to be rather at the end of the month. I'm sure you are going to like it!!
AlxUnderBase
Enlightened
Sir , what's about this version of the Proman's software ? : https://www.mediafire.com/folder/cy311s31kjf98/Software_and_Drivers#3wdt8v5qhekrk
Should be this one used to write the modules ?
HardAzRockz
Professional
What’s the release date? I thought it was earlier this month. I pre-ordered on HSS
XtraSmiley
Legendary
Great news. Any idea on how tariffs are hitting these for US buyers?
I'm not gonna change the price for you now guys. Specially since you preordered, so I'll have to eat those tariffs. Next batch will be more expensive for sure.
XtraSmiley
Legendary
See guys, preorders are awesome, but not as awesome as Darksoft!
RepairGuy95
Champion
I am beyond stoked for this!
nnap
Grand Master
Just received my shipping notification. Very excited for this one!
CPZ - SAVEYOURGAMES
Champion
- Joined
- Jul 22, 2015
- Messages
- 658
- Reaction score
- 1,412
Hello Guys we've started yesterday to ship Namco System2, we will whip all the orders by the end of the week
We have a last one piece available if someone miss it
Best regards
Aldo
We have a last one piece available if someone miss it
Best regards
Aldo
I will upload the instructions today. I have 2 IMPORTANT comments that you MUST remember before installing this multi:
* Separate the 2 PCBs of your Namco system 2 and install the kit separately!
* in the Main PCB, be EXTREMELY careful with some small metal GND connectors that stand out. They change from position depending on the game, so it's difficult to set some standard. you NEED to bend them or remove! otherwise they will clash with the PCB of the multi!
* Separate the 2 PCBs of your Namco system 2 and install the kit separately!
* in the Main PCB, be EXTREMELY careful with some small metal GND connectors that stand out. They change from position depending on the game, so it's difficult to set some standard. you NEED to bend them or remove! otherwise they will clash with the PCB of the multi!
Last edited:
AlxUnderBase
Enlightened
I will upload the instructions today. I have 2 IMPORTANT comments that you MUST remember before installing this multi:
* Separate the 2 PCBs of your Namco system 2 and install the kit separately!
* in the Main PCB, be EXTREMELY careful with some small metal GND connectors that stand out. They change from position depending on the game, so it's difficult to set some standard. you NEED to bend them or remove! otherwise they will clash with the PCB of the multi!
To not create confusion , on the clip , i used my hakko 301 to desolder previously and then i just removed with my
fingers from the pcb …
Last edited:
What temperature and airflow percentage did you use on your HAKKO @AlxUnderBase ?
You don't necessarily need to remove if you don't have the tools or the time. You can just bent it towards one side gently using your thumb.