Can someone please confirm the value of capacitors C53 and C54?
I was referencing your capacitor list and I believe capacitor C53 is incorrect on your list. When I was removing C53 I could’ve swore it was a 1uf 50v and Robert verified it. You have 10uf 16v. Also your list didn't mention C2 and C3 are 0.47uf Bi Polar capacitors. Other than that, good job and thank you.
Thanks , for pointing , i’ll check again and if is
(wrote this comment last night but i forgot to push on post reply 
)
Forward voltage.
I understand but there are some local shops close to my place, that sell diodes as well. What spec are important for this diode selection ? What should be Vf value ?
Yes like @Darksoft said it’s probably possible but it’s a lot of work. The game draws the text top to bottom and right to left, so someone would have to adjust that code and make sure it functioned in all dialogue situations. The original mod was just replacing the gfx references so there’s no existing work to leverage.@ekorz bros , can be done some hex moddificiations to have the text writen from right to the left ?
exemple :
- now is in this format :
and will be nice if can be this way :
Can be possible to have the text in this order ?
We're very lucky to have this version already. Kudos for you .
psx stuff runs on a different processor, so someone would need knowledge of that one (mips i think) and 68k (arcade) to make use of that version. if it's emulated on the psx and the raw 68k binary is somewhere there, which is totally possible, then the data would be more easily useful. either way there is still plenty of work to do unless for some reason the psx version uses an emulated rom, and that rom boots on arcade hardware without any other changes (doubtful).
