Retro Hardware Capacitors LISTS

[Enskynet]

Hello,

By any chance, does anybody has at hand the cap list for a nanao ms-2932. I don't want to buy a premade kit online.

Thanks!

I have one here.

Can make it this week end if you are not hurry

 

[nem]

MS9-29 and MS2932 are two completely different chassis.

 

[Hackcell]

I have one here.

Can make it this week end if you are not hurry

I can surely wait!!!

 

[Derick2k]

Not sure if this has been posted somewhere, but this is the cap list for the WeiYa P271 PSU used in the Taito Vewlix, maybe other Taito cabs?

Location	Capacitance	Voltage	Temp	Width	Height	Lead Spacing	OEM Brand (All seem to be crap brands)
C7	330uf	200	85	22	30		TK (Toshin Kogyo)
C6	330uf	200	85	22	30		TK (Toshin Kogyo)
C5	330uf	200	85	22	30		TK (Toshin Kogyo)
C301	1uf	50	105	5	11		CS (12 Kuang Jin)
C201	1uf	50	105	5	11		CS (12 Kuang Jin)
C101	1uf	50	105	5	11		CS (12 Kuang Jin)
C306	68uf	63	105	8	11		CS (12 Kuang Jin)
C206	68uf	63	105	8	11		CS (12 Kuang Jin)
C106	68uf	63	105	8	11		CS (12 Kuang Jin)
C305	47uf	50	105	6	11		CS (12 Kuang Jin)
C205	47uf	50	105	6	11		CS (12 Kuang Jin)
C105	47uf	50	105	6	11		CS (12 Kuang Jin)
C115	33uf	50	105	6	11		CS (12 Kuang Jin)
C311	2200uf	25	105	13	26		CS (12 Kuang Jin)
C211	3300uf	10	105	13	26		CS (12 Kuang Jin)
C213	3300uf	10	105	13	26		CS (12 Kuang Jin)
C111	3300uf	16	105	13	30		Asia'X
C113	3300uf	16	105	13	30		Asia'X
C112	1000uf	16	105	10	20		CS (12 Kuang Jin)
C214	22uf	50	105	5	11		CS (12 Kuang Jin)
C114	22uf	50	105	5	11		CS (12 Kuang Jin)

I am also testing a fix for the pulsing/shutdown issue on the 12v rail, I will post those details when I have them ready.
Also, this PSU should get fresh thermal grease/paste reapplied,

 

[Enskynet]

I can surely wait!!!

i'll send it tonight !

 

[Ape Cosplay]

Omron S8XA-531-400 (Jaleco Pony Mark IV)

C4	330µF, 200V, 105°C
C51	2200µF, 10V, 105°C
C52	2200µF, 10V, 105°C
C53	1200µF, 10V, 105°C
C54	?
C61	560µF, 35V, 105°C
C62	82µF, 25V, 105°C
C71	680µF, 16V, 105°C
C72	220µF, 10V, 105°C

I can't read C54 it's completely burnt...

 

[ShootTheCore]

Catching up on this thread.

MS9-29 and MS2932 are two completely different chassis.

I stand corrected! Hopefully someone can submit a MS2932 cap list for us.

Not sure if this has been posted somewhere, but this is the cap list for the WeiYa P271 PSU used in the Taito Vewlix, maybe other Taito cabs?

I've added that cap list to the Database.
https://docs.google.com/spreadsheets/d/1mUjTrXvZTQMyRPep7-1FmXmC8WXToMm2SQZorYsr2d8/edit?usp=sharing

Omron S8XA-531-400 (Jaleco Pony Mark IV)

I've added that cap list to the Database.
https://docs.google.com/spreadsheets/d/1r7S6dVLkNXTTu8ECeRagXg9CXIaxSeMGLCktSzWwgMM/edit?usp=sharing

 

[Ape Cosplay]

@ShootTheCore thanks to @nem we know C54 is 1ųF, 50V now.

 

[ShootTheCore]

@ShootTheCore thanks to @nem we know C54 is 1ųF, 50V now.

Awesome - I’ve updated the spreadsheet.

 

[XtraSmiley]

I've got a Taito Kiki Kaikai and need some help, can anyone confirm C1 and C12 below and also let me know if I need to measure the HxWxL and the brand is BELLCON. Also, I have no idea how to get the temps people are posting. Thanks.

16v 220uF C1 (hard to read)
16v 220uF C12 (missing, but likely 16v 220uF)
16v 220uF C66
16v 220uF C74
16v 220uF C75
16v 220uF C76
16v 220uF C81

16v 10uF C61
16v 10uF C67

16v 1000uF C72

 

[meyerli]

I have compiled lists for two other monitor chassis:

Nanao MS-2934​	​	​	​
​	​	​	​
Capacitor​	Diameter​	Qty​	Location​
1uF 50V​	5mm​	1​	C102​
2.2uF 50V​	5mm​	3​	C211, C212, C213​
10uF 50V​	5mm​	4​	C455, C456, C457, C956​
10uF 250V​	10mm​	1​	C322​
22uF 50V​	5mm​	4​	C107, C222, C458, C459​
47uF 16V​	5mm​	5​	C201, C202, C203, C220, C957​
47uF 250V​	13mm​	2​	C512, C952​
100uF 16V​	5mm​	2​	C221, C960​
100uF 35V​	6mm​	4​	C407, C408, C409, C503​
470uF 16V​	8mm​	1​	C402​
470uF 25V​	10mm​	1​	C971​
470uF 250V​	25mm​	1​	C951​
680uF 10V​	8mm​	1​	C955​
680uF 35V​	10mm​	2​	C953, C954​
1000uF 35V​	13mm​	1​	C406​
1200uF 200V​	35mm​	1​	C905​

Sanwa 29E31S​	​	​	​
​	​	​	​
Capacitor​	Diameter​	Qty​	Location​
0.47uF 50V​	5mm​	1​	C103​
1uF 50V​	5mm​	7​	C102, C105, C309, C315, C405, C408, C474​
1uF 100V​	5mm​	1​	C822​
2.2uF 50V​	5mm​	1​	C104​
4.7uF 50V​	5mm​	1​	C101​
4.7uF 100V​	5mm​	1​	C423​
10uF 16V​	5mm​	1​	C839​
10uF 25V​	5mm​	1​	C4A7​
10uF 50V​	5mm​	7​	C328, C441, C446, C447, C452, C481, C852​
10uF 50V Bipolar​	7mm​	1​	C456​
22uf 25V​	5mm​	1​	C4A6​
33uF 50V​	5mm​	1​	C439​
33uF 50V Bipolar​	8mm​	1​	C437​
33uF 250V​	13mm​	2​	C426, C831​
47uF 25V​	5mm​	1​	C107​
47uF 50V​	6mm​	2​	C421, C471​
47uF 250V​	13mm​	1​	C107​
100uF 10V​	5mm​	1​	C310​
100uF 16V​	5mm​	2​	C840, C851​
100uF 25V​	7mm​	2​	C306, C429​
100uF 35V​	6mm​	1​	C320​
100uF 160V​	16mm​	1​	C833​
220uF 25V​	8mm​	1​	C305​
220uF 35V​	8mm​	1​	C313​
220uF 50V​	10mm​	1​	C821​
330uF 35V​	10mm​	1​	C427​
470uF 25V​	10mm​	3​	C317, C409, C438​
1000uF 35V​	13mm​	1​	C835​
1000uF 50V​	13mm​	1​	C834​
2200uF 16V​	16mm​	1​	C836​
3300uF 35V​	16mm​	1​	C314​

Thanks a lot for the lists. As a newbie in re-capping it is very helpful to get the right stuff and find motivation to start somewhere.

While re-capping my Sanwa 29E31S monitor chassis I had few differences which I would like highlight here. Most of them didn't matter as the new cap only had a higher voltage than the old.

Maybe somebody can have a look at them on next re-capping project.

Sanwa 29E31S
Capacitor	Diameter	Qty	Location
0.47uF 50V	5mm	1	C103
1uF 50V	5mm	7 8	C102, C105, C309, C315, C405, C408, C474, C822
1uF 100V	5mm	1	C822 (see row above)
2.2uF 50V	5mm	1	C104
4.7uF 50V	5mm	1	C101
4.7uF 100V	5mm	1	C423
10uF 16V	5mm	1	C839
10uF 25V	5mm	1	C4A7
10uF 50V	5mm	7	C328, C441, C446, C447, C452, C481, C852
10uF 50V Bipolar	7mm	1	C456
22uf 25V 16V	5mm	1	C4A6
33uF 50V	5mm	1	C439
33uF 50V Bipolar	8mm	1	C437
33uF 160V	13mm	1	C426
33uF 250V	13mm	2 1	C426, C831 (see row above)
47uF 25V	5mm	1	C107
47uF 50V	6mm	2	C421, C471
47uF 250V	13mm 6mm	1	C107
100uF 10V 35V	5mm	1	C310
1000uF 6.3V	5mm	1	C840
100uF 16V	5mm	2 1	C840, C851 (see row above)
100uF 25V	7mm	2	C306, C429
100uF 35V	6mm	1	C320 -> Couldn't find this one on my chassis.
100uF 160V	16mm	1	C833
220uF 25V	8mm	1	C305
220uF 35V	8mm	1	C313
220uF 50V	10mm	1	C821
330uF 35V	10mm	1	C427
470uF 16V	10mm	1	C409
470uF 25V	10mm	3 2	C317, C409, C438 (see row above)
1000uF 35V	13mm	1	C835
1000uF 50V	13mm	1	C834
2200uF 16V 10V	16mm	1	C836
3300uF 35V 25V	16mm	1	C314
33uF 160V	10mm	1	C433 (was missing on the list)

 

[ShootTheCore]

I've updated the Sanwa 29E31S spreadsheet with the updated cap information - thanks @meyerli .

https://docs.google.com/spreadsheets/d/1nysqWrW3n-kp-VhbN4LExC1DiPKn8DNiry1igW4O2s8/edit?usp=sharing

 

[meyerli]

I've updated the Sanwa 29E31S spreadsheet with the updated cap information - thanks @meyerli .

https://docs.google.com/spreadsheets/d/1nysqWrW3n-kp-VhbN4LExC1DiPKn8DNiry1igW4O2s8/edit?usp=sharing

Double checked the list while recapping a second chassis. Just some minor updates on the list but now should be complete.

 

[ShootTheCore]

I updated the Google Drive sheet with the fresh info - thanks @meyerli

https://docs.google.com/spreadsheets/d/1nysqWrW3n-kp-VhbN4LExC1DiPKn8DNiry1igW4O2s8/edit?usp=sharing

 

[xodaraP]

Recently recapped/repaired a PC Engine Duo (the black console not the later R or RX)

22uF 6v x 15
47uF 6v x 3
100uF 6v x 10

100uF 10v x 1

10uF 16v x 6
22uF 16v x 4
47uF 16v x 1
100uF 16v x 2
220uF 16v x 1
330uF 16v x 3
470uF 16v x 3
1000uF 16v x 1

4.7uF 35v x 4

3.3uF 50v x 1

 

[xodaraP]

Panasonic 3DO FZ-10 (non Anvil)

470uF 4V x 1

100uF 6.3V x 4
470uF 6.3V x 3

1000uF 10V x 1

100uF 16V x 11

10uF 25V x 2

47uF 35V x4

1uF 50V x 1
2.2uF 50V x 1
10uF 50V x 1
22uF 50V x 2

 

[LittleLarrySellers]

Going through a restore of my Outrun and just redid the power amp and filter caps in the base of the cab:

2 big ones:
13000uf 65v (NOTE: schematic has this at 22000uf but I replaced with what I saw)
4700uf 63v

amp board:
100uf 25v x9
220uf 25v x4
4.7uf 25v x2
10uf 16v x2

 

[trashedcabs]

Sanwa PFX KW0606A cap list:

Main chassis:

Location	Capacitance (uF)	Voltage rating
C109	220	16v
C111	10	50v
C119	47	16v
C121	100	16v
C201	10	50v
C202	4.7	50v
C210	4.7	50v
C211	220	16v
C222	10	50v
C223	10	50v
C303	470	25v
C304	470	25v
C305	220	50v
C307	4.7	50v
C308	1	50v
C403	1	50v
C406	100	16v
C411	4.7	50v
C420	33	50v
C422	10	50v
C423	47	50v
C427	4.7	50v
C430	220	250v
C439	100	16v
C440	47	16v
C441	2.2	50v
C446	220	25v
C447	22	16v
C451	100	16v
C452	100	16v
C453	100	16v
C807	680	400v
C810	10	50v
C820	2200	25v
C822	220	250v
C824	4700	25v
C826	220	10v
C827	330	16v
C830	100	200v
C831	220	16v
C832	100	16v
C833	22	25v
C837	100	25v
C841	22	50v

Neck board:

Location	Capacitance (uF)	Voltage rating	Note
C902	33	200v
C901	47	16v
C917	1	200v
C907	1	200v
C912	1	200v
C916	1	250v	BP
C906	1	250v	BP
C911	1	250v	BP

Here's a digikey list minus the filter cap and the BP caps (not stocked) https://www.digikey.com/en/mylists/list/152NMW9KSD

BTW, a version of this chassis released in parts of Asia and Europe were missing the pins and NTC thermistor for the 100v degauss. For 100v, the murata part number is PTH451A4R5Q21 (4.5ohm high current). For 220v, the murata part number is PTH451A180N21 (18 ohm high current).

 

[ShootTheCore]

Catching up on the thread and adding entries to the Google Drive.

Sanwa PFX KW0606A - Thanks to trashedcabs
https://docs.google.com/spreadsheets/d/1QFczhwxW4kiKkU9JmVxwihV0WGgFmsIRZpUoJjCjecQ/edit?usp=sharing

Outrun Cabinet Power Amp and Filter Caps - Thanks to LittleLarrySanders
https://docs.google.com/spreadsheets/d/14ioPwmSlvpmEbsgtxAcStSFTyCoVSEkEjROxdddQuGM/edit?usp=sharing

Panasonic 3DO FZ-10 (non-Anvil) - Thanks to xodaraP
https://docs.google.com/spreadsheets/d/1otCVkQ5zwfPOf4ZUsl_EPs7C6VXeIp_R3m75dqD37OE/edit?usp=sharing

PC Engine Duo (original model) - Thanks to xodaraP
https://docs.google.com/spreadsheets/d/11zlF0T6AIik0aqCtWG9_a2G8bB3Vx0n__u0PDxExDnA/edit?usp=sharing

-----------------------------
Main Directory of Everything
https://drive.google.com/drive/folders/1oSymCdgrIQSd9XUX8g3iV2E7HlMy3vPS?usp=sharing

 

[Hackcell]

i'll send it tonight !

Hello there,

Did you complete it?

Thanks!