Retro Hardware Capacitors LISTS

[Sp33dFr34k]

@ShootTheCore regarding the MS9 caplist, the bipolar cap on position C411 should be 2.2uf 50v, instead of 22uf 50v, could you correct this in your list?

 

[ShootTheCore]

@ShootTheCore regarding the MS9 caplist, the bipolar cap on position C411 should be 2.2uf 50v, instead of 22uf 50v, could you correct this in your list?

Spreadsheet has been updated. Thank you for the correction!

Nanao MS9-29 Cap List
https://docs.google.com/spreadsheets/d/1roSFgShhw2V40tvFZny8wRXi_KDdKdUg2YcNI_iSw7U/edit?usp=sharing

 

[AlxUnderBase]

@ShootTheCore regarding the MS9 caplist, the bipolar cap on position C411 should be 2.2uf 50v, instead of 22uf 50v, could you correct this in your list?

Spreadsheet has been updated. Thank you for the correction!

Nanao MS9-29 Cap List
https://docs.google.com/spreadsheets/d/1roSFgShhw2V40tvFZny8wRXi_KDdKdUg2YcNI_iSw7U/edit?usp=sharing

Yes , i can confirm in the MS9-29 kit we have BP 2.2uf 50V for C411 .

 

[raynex]

[EDIT] I found a stash of 10uf 50v caps to finish recapping my board. I think I've come to the conclusion that Sega just ran out of 10uf16v caps and just used 50v. Every 10uf cap, both big and small, were 50v and all made by Sanyo. So for now, I'm good. Maybe it'll be good reference for someone in the future.

Could someone confirm if all the 10uf caps on the S18 stock board (clutch hitter in this case) are indeed 10uf 16v as the Capacitor Database says? I'm recapping mine at the moment and the ones I'm pulling off are 10uf 50v. Just want to confirm before I potentially put undervolted caps on. I'd appreciate any help on this.

 

[bodgit]

[EDIT] I found a stash of 10uf 50v caps to finish recapping my board. I think I've come to the conclusion that Sega just ran out of 10uf16v caps and just used 50v. Every 10uf cap, both big and small, were 50v and all made by Sanyo. So for now, I'm good. Maybe it'll be good reference for someone in the future.

Could someone confirm if all the 10uf caps on the S18 stock board (clutch hitter in this case) are indeed 10uf 16v as the Capacitor Database says? I'm recapping mine at the moment and the ones I'm pulling off are 10uf 50v. Just want to confirm before I potentially put undervolted caps on. I'd appreciate any help on this.

Using a higher voltage rated capacitor for the same capacitance value is for the most part fine in this scenario.

16v is generally the lowest you would use as there's theoretically a 12v supply rail on the PCB even though most of the board logic is going to be running on the 5v.

 

[Crunch]

Capcom Impress PSU - Credits to @BuddyC !

C1 50V 4,7 UF
C2 50V 22 UF 4MM DIA
C3 50V 2,2 UF 4MM DIA
C4 200V 220 UF(M) 25MM 20MM DIA
C5 50V 1 UF 4MM DIA
C10 50V 4,7 UF
C11 50V 10 UF 4MM DIA
C12 200V 220 UF(M) 25MM 20MM DIA
C13 50V 4,7 UF 4MM DIA
C14 50V 1 UF 4MM DIA
C15 50V 47 UF 5MM DIA
C17 10V 2200 UF 25MM 12MM DIA
C21 16V 1000 UF 8 MM DIA
C27 16V 1000 UF 8 MM DIA
C29 16V 470 UF 8MM DIA

Orderlist
50v 4,7 uf 4mm - 3x
50v 22 uf 4mm - 1x
50v 2,2 uf 4mm 1x
200v 220 uf 25mm tall 20 dia - 2x
50v 1 uf 4mm - 2x
50v 10 uf 4mm - 1x
50v 47 uf 5mm - 1x
10v 2200 uf 25 mm tall, 12mm dia - 1x
16v 1000 uf 8 mm - 2x
16v 470 uf 8mm - 1x

 

[ShootTheCore]

Added Capcom Impress PSU to the Google Spreadsheet Database:
https://docs.google.com/spreadsheets/d/1HBW0YuSBDDloKDWQ3Kcw0OFxkV-o2tONKzcPssrw8_I/edit?usp=sharing

 

[ShootTheCore]

Cap lists by @NFGx added:

Namco PA audio amp in Cyberlead cabinet
https://docs.google.com/spreadsheet...uUN2MD1j4rXwVj5HecpvCL-Us/edit?usp=drive_link

Seta Twin Eagle
https://docs.google.com/spreadsheets/d/1lEG361UzN25w6tiQVzTVsCT2r0aGlFEKDLCZbhg77AE/edit?usp=sharing

NFGx also had a cap list for the Seibu Kaihatsu SPI System, but we already have a cap list from @ekorz for those boards in the database.

 

[NFGx]

Added the Sega Mega-System (MegaTech) board:

https://gamesx.com/wiki/doku.php?id=caps:arcade