DARKSOFT What Donor Board to use for the CPS1 Multi
- Thread starter twistedsymphony
- Start date
PascalP
Legendary
as is it should be good for use with patched ROM sets.
theoretically, yes. test it out and let us know
drfunk2k
Grand Master
Thrillhouse
Enthusiast
Wasn't shipping on them from China to the US super expensive? When I priced them out on TB, it came to about $29 USD after shipping for one - "coincidentally" the same price shipped on eBay.
drfunk2k
Grand Master
i mailed them to AUS, but yea shipping to USA with a trusted tracking is usually expensive. Got to order in bulk lol good thing he has 1000 :p
Thrillhouse
Enthusiast
Ohh that's right, he's in AUS.
Well for the first time, I can honestly say: lucky him for living in AUS
Please don't give me THE BOOT, my Australian friends
They are not the same guy and they are both members here on the forum. They are "neighbors" though so they're often reselling PCBs that they're picking up from the same auction houses and the same operators.
SheepNova has acted as reseller for some of Lydz custom PCBs in the past though since he's setup to sell through eBay and take Paypal payments and Lydz is not.
drfunk2k
Grand Master
the guess was not hard as they use the same pictures :p
I bought lots of stuff from sheep nova before mostly MVS and atomiswave, never disappointed BTW, so when I saw the post for the C boards I figured it was unusual for SN to sell those, now all makes sense.
So DJsheep what happened to your webpage? I remember reading the story behind the name sheepnova and thought I could buy directly from you there but it never happened.
So DJsheep what happened to your webpage? I remember reading the story behind the name sheepnova and thought I could buy directly from you there but it never happened.
xodaraP
Legendary
For foreigners we use a regular shoeOhh that's right, he's in AUS.i mailed them to AUS, but yea shipping to USA with a trusted tracking is usually expensive. Got to order in bulk lol good thing he has 1000
Well for the first time, I can honestly say: lucky him for living in AUS
Please don't give me THE BOOT, my Australian friends
It's not the boot you need to worry about, it's the drop bears
Last edited:
duffcon
Professional
I've read the OP like 5 times. I have a Factory CPS-DASH SF2:CE with a B-21 C board, no battery. As I understand this thread, it will work with the multi, but only with patched ROMs. Is that correct? Does it require modification?
based on the information we know so far. that is correct
theoretically no modification is required unless you want to modify the C-board to run un-patched ROMs.
For foreigners we use a regular shoe
It's not the boot you need to worry about, it's the drop bears
Yes! Both 10 and 12Mhz boards are compatible, just make sure that the Audio section in the A Board is populated. If the board comes from a CPS1.5 Board it won't be populated as it uses Qsound.
so as long as i have the correctcps1 c board
and original cps1 a board
im good and ready for ths cps1 multi?
Yes
I just wanted to comment that I recently de-de-suicided two 92641C-1 C-Boards
normally the B-21 chip has 3 pins in a row tied to ground on this chip, the de-suicide mod cuts the traces to two of these pins and ties them to +5V. with the 3rd pin still tied to ground.
to de-de-suicide I simply removed the wire, then soldered the 3 pins together; such that the two pins with the cut traces were now using the 3rd pin's connection to ground.
After doing this I was able to install a fresh battery, revive the keys and use the board as it was originally intended.