Hey Mike,
I was wondering if you might be able to help me with something. I recently purchased an SPI board with Viper Phase 1 and Raiden Fighters Jet. When running the board with my HAS via S-Video to my tate CRT (A Sansui TV) I seem to get a rolling picture. I have tried changing settings on the CSync Level and Impedance switch, and the CSync Processing switch, but the best I can get is a color image that rolls. My CPS2, and PGM boards work great on this TV, but the SPI board is a no go so far.
I don't want to try the "Unprocessed" setting because the instructions say to only use if you know what you're doing, and I don't.
I was wondering if maybe you might have a trick up your sleeve for this kinda of issue. It's a long shot, but I thought I'd ask.
Thanks!
I was wondering if you might be able to help me with something. I recently purchased an SPI board with Viper Phase 1 and Raiden Fighters Jet. When running the board with my HAS via S-Video to my tate CRT (A Sansui TV) I seem to get a rolling picture. I have tried changing settings on the CSync Level and Impedance switch, and the CSync Processing switch, but the best I can get is a color image that rolls. My CPS2, and PGM boards work great on this TV, but the SPI board is a no go so far.
I don't want to try the "Unprocessed" setting because the instructions say to only use if you know what you're doing, and I don't.
I was wondering if maybe you might have a trick up your sleeve for this kinda of issue. It's a long shot, but I thought I'd ask.
Thanks!