Ok I first mesure the battery and it was 1.36v.It’s fine. Use fresh batteries. Turn the wheel one click to V with the solid and dash lines (not ~). Black probe on negative, red on positive. Try on a simple battery first if you want.
with the system on, put the black probe on jamma pin 1 and the red on jamma pin 3.
Thanks, what is the best mother board for the multi ?
I use a consolized MV1C people say its not the best but it works great for me.Meaning that I should found another MV1FS, because this model slot is stereo. What about the consolized slots like omega, analogue CMVS and other? Is there any consolized MVS slot which are known to perform well whit the Darksoft Multi MVS?
Sorry, juste I am a bit disappointed to have to buy the same slot MV1FS again, for an unexplained problem, the risk is to have the same issue. With the multi AES I had an unexplained issue as well, I bought a new one and same issue. Is there other thing to test on my current MV1FS other than the sp1 (I will test soon)?Search around the forum for ones you’re interested in, or read some threads. A lot of questions have been covered multiple times.
I have had great luck using the multi with Neo Geo FZ motherboard both in a cab and on a supergun.
If you want Stereo sound though, grab the FS
I grabbed a clean one I thought it was good but it is not ! Now I don’t know what to do. The stereo mod on the FZ, is it difficult to do ?I have had great luck using the multi with Neo Geo FZ motherboard both in a cab and on a supergun.
If you want Stereo sound though, grab the FS motherboard.
The mod isn't difficult, but no one sells a pre-made pcb for the 1fz that I'm aware of.The stereo mod on the FZ, is it difficult to do ?
Sorry, juste I am a bit disappointed to have to buy the same slot MV1FS again, for an unexplained problem, the risk is to have the same issue. With the multi AES I had an unexplained issue as well, I bought a new one and same issue. Is there other thing to test on my current MV1FS other than the
After more than 10 years in Japan, I over use the « sorry »No need to be sorry. I’m just trying to let you know there’s a lot of great info on the forums already if you look?