What's new

About namco system 11 c431 keycus(dancing eyes)

Take care of your board guys ! :-D
Finished right now.
Tested with Ossc

F485D95A-33F8-496A-85AB-8BF8CB85AD6B.JPG

FFA6E3BA-FB55-42CF-B519-C92AFA386EFB.JPG

C252BA96-D45F-4CF1-9F50-D77EB957031F.JPG

Thanks:
@WangDrum and @Franco23444
 
tested to the end Dancing Eye, time runs normally although it is not displayed correctly. there are no other errors.
 
Checking test menu of my soul edge, is written: SO4 / VER.C
But on board i have SO1 / VER. C 8|
So the only different is 2MB chip version

IMG_2806.JPG


IMG_2804.JPG
 
On my last board Tekken 2 seems i have custom C352 audio chip broken.
Its work at boot for 1 second, i can hear "GoodMorning" simetimes when its really cold, but after that audio gone and it will go on "initializing" screen.
What you think ?
 
Hi! :) pierpa86


To upgrade a Soul Edge Ver. II to the (Asia, SO4/VER.C) version, do you just need to reprogram 1J & 1L ?

Is the file you dumped a Soul Edge Ver. II (Asia, SO4/VER.C) or a Soul Edge Ver. II (World, SO4/VER.C) ?

Thanks. :thumbup:
 
chacal231077 said:
Hi! :) pierpa86


To upgrade a Soul Edge Ver. II to the (Asia, SO4/VER.C) version, do you just need to reprogram 1J & 1L ?

Is the file you dumped a Soul Edge Ver. II (Asia, SO4/VER.C) or a Soul Edge Ver. II (World, SO4/VER.C) ?

Thanks. :thumbup:
Click to expand...
I really dont know Asian or World, i take a picture of settings but there isnt any info about it.
What board you have ? with 2 or 4 ic ?
If you have two ic 1j and 1l this is the only version aroud, if you have 4 ic motherboard you can get the other dump that seems Asian:

1751831809879.png


Checking here there is no SO4 Ver.C world
But keycus is the same C409, and daughter board also is the same so yes you can just update 1j and 1l or 2f,2k,2j,2l
There are two version of 6D. what game version you have ?
 
Noob question for great guys :-D
I know you're all on vacation, but the brain never stops.

About dancing eye keycus, more difficult one, since we need to reproduce code part that do hex to dec work, traslate to mips and path it over program.
What about emulate it using cpld or a microcontroller ?
 
Not really, have been trying to sort out other things, not sat on a computer much...

Still waiting for someone to test the de protected point blank 2 (requires gun board).,
(and prime goal EX needs testing... but i doubt anyone's desperate for that)
 
Hammy said:
Not really, have been trying to sort out other things, not sat on a computer much...

Still waiting for someone to test the de protected point blank 2 (requires gun board).,
(and prime goal EX needs testing... but i doubt anyone's desperate for that)
Click to expand...
i miss board to test, my last tekken is faulty.
@Hammy can i ask you why Pocket racer is hard to make :-D i'm really curious
 
Last edited:
I'd be happy to test/obtain a board to further this work.
I have my eye on a point blank 2.
 
I promise I will buy two board and rom to test when/if Pocket Racer and DunkMania are ready.
 
Hello guys.
Just for learning something new im trying to understand what happen on Dancing Eye about Hex to Dex
The game count the time in hex decimal the number of timer and send it to keycus and game need back it in decimal ?
So there is an address in ram that i find in mame debug to get hex number, convert it in a routine extra (need to add) and send back number to another location ?
I get it correct ?
 
You must log in or register to reply here.
Back
Top