Home Arcade System

[jassin000]

Due to my situation I had to put all three (yup my new Vewlix L-AMI has arrived) cabs into a storage unit.

I saved out my most favorite PCBs (mostly the Darksoft Multi's) and made myself this super compact little desk setup...

Emulator sharp, only its not emulation!

 

[KinG_SoPa]

@jassin000 i love that set up!, im actually looking for a 27” monitor for the cps2 setup how is that BenQ working out?

 

[RGB]

Very nice setup @jassin000, but how about putting a book under the HAS to level it with the MVS?

edit: I notice the super limited HAS keychain, glad to see you keep it! I roll mine together with the cabinet key:

 

[jassin000]

but how about putting a book under the HAS to level it with the MVS?

Sometimes I use a DVD case or two, I just didn't have one handy when I snapped that.

Really I would like to get one of these classy Arcade-Projects JAMMA extenders.

 

[KinG_SoPa]

Someone help im getting a green screen :/

 

[KC-Slater]

@KingSopz How is the OSSC connected to your display, and what kind of display are you using?

There is a little switch on the HAS near the kick harness connector and the AV out--try flipping that? (I believe that toggles the CSync Processor between a few different options, but check your HAS manual for details, as I have a slightly older model that used jumpers.)

 

[jassin000]

The OSSC is displaying the correct sync information (59.63)... I question the CPS2 setup, it's "normal/common" for them to solid color screen like that.

 

[RGB]

I suggest you reseat the B board, it looks like the CPS2 A+B connection problem.

 

[The Spaniard]

Was the multi working before you connected it to the HAS?

Could be an issue with that firstly.

 

[opt2not]

I suggest you reseat the B board, it looks like the CPS2 A+B connection problem.

This. I recently moved my CPS2 Multi from my cabinet to a supergun set-up, and after I plugged it I noticed red screen and lines on the screen. Re-seating the B board fixed it up.

 

[megaMANX6]

I have also received my HAS Supergun. Now looking to buy a power supply

 

[KinG_SoPa]

Hey guys i bought this A+B board dark soft from a guy in italy and last night was the first time I turned it on , maybe in the shipping stage something got loss, i know beginners stuff about the darksoft kit but i never mess with one :/ , @jassin000 been teaching me the basics of the cps2. If you have time jassin000 maybe i can take it to him so we can figure it out together that way i get some hands on leassons. But tonight ill try reseating the B board.

 

[KinG_SoPa]

Sorry @RGB ill start a new thread for this, i dont wanna bring UnHAS related stuff here.

 

[Sp33dFr34k]

@KingSopz that's probably a good idea. But definitely reseat the PCB and press it firmly. If that doesn't work, short the EXE5 (or is it EXC5?) point with a screwdriver or something similar.

 

[nonosto]

Someone help im getting a green screen :/

I am same problem but it's not a OSSC or HAS problem...it's seems problem with decrtp rom...how to paint it in red what's kind of paint used please?

 

[KinG_SoPa]

@KingSopz that's probably a good idea. But definitely reseat the PCB and press it firmly. If that doesn't work, short the EXE5 (or is it EXC5?) point with a screwdriver or something similar.

I tired this still no luck , i have someone around my area thats gonna help me this weekend to resolve this issue , ill get back to you guys with whats causing this

 

[rocco]

Has anyone made a power supply cover for the Meanwell MWP-606 yet or is there any plan to do so? I would be really interested in one of those.

I'm a little bit scared because of the open contacts.

 

[hernan43]

I used a plastic storage container that fits the PSU. I drilled holes in it for the wires to pass through. It works superbly. It keeps my hands protected when I'm digging around inside my arcade setup.

 

[jassin000]

You guys know I'm all about the cabs (that's why I own three of 'em) but damn...
I've been having some of the best runs of my gaming life on this HAS+OSSC+BenQ setup!

It must be the low lag of the monitor? Maybe the LS32 stick in my SG build? Maybe a combo of both?
Anyway I highly recommend these (model RL2755) LCDs.
I've been doing some testing, but it's basically the same as the LG B6 OLED...

Default OSSC Profile: Scanlines On, Scale 4x, 4:3 aspect ratio

• CPS3 (Darksoft Multi)
• CPS2 (Darksoft Multi)
• CPS1 (SF2:CE/Final Fight/Daimakaimura/Knights of the Round)
• Martial Champion
• Bubble Bobble
• Irem M92 (R-Type Leo/In the Hunt)
• TMNT
• System 16 (Golden Axe/Altered Beast/E-Swat/Shinobi)
• System 18 (Moonwalker)
• Ninja Gaiden
• Namco System 1 (Splatterhouse)
• Life Force

Special OSSC Profile: Scanlines On, Scale 4x, 4:3 aspect ratio, pre and post coast 3, H threshold 10.0+ (or until lock)

• Neo-Geo MVS (1FZ, UniBIOS 4.0, Darksoft Multi)

Special OSSC Profile 2: Scanlines On, Scale 4x, 4:3 aspect ratio, V. backporch 34

• M72 (R-Type)
• M84 (R-Type 2)

Not Working with BenQ RL2755*

• Midway Y Unit (Mortal Kombat)
• Midway T Unit (Mortal Kombat 2)
• Midway Wolf Unit (Rampage World Tour)

*Works with iScan DVDO VP30

 

[KinG_SoPa]

Thanks to @ekorz we got it resolved , was simple as the darksoft milti not being press down enough , thanks a million!.


Ps. @RGB do you have extra Voltage guage, mines worked the first day I connect the HAS but then it stop working. @ekorz did some testing on it and its differently that piece but the HAS its self works perfectly (See picture)