What's new

Home Arcade System

Glad to see this.

About the voltmeter - I'll send you a new one.
 
KingSopz said:
Thanks to @ekorz we got it resolved :thumbsup: , was simple as the darksoft milti not being press down enough :whistling: , thanks a million!.
Click to expand...
Fantastic! Glad that it was an easy fix. It rarely works out that way in our hobby, so count your lucky stars when they do! Enjoy the awesomeness of CPS2. :thumbsup:
 
KingSopz said:
Thanks to @ekorz we got it resolved :thumbsup: , was simple as the darksoft milti not being press down enough :whistling: , thanks a million!.


Ps. @RGB do you have extra Voltage guage, mines worked the first day I connect the HAS but then it stop working. @ekorz did some testing on it and its differently that piece but the HAS its self works perfectly (See picture)
Click to expand...
Yeah my voltmeter went udders up on the second day, but my HAS has been working like a champ. It is ULTRA nice.
 
hernan43 said:
Yeah my voltmeter went udders up on the second day, but my HAS has been working like a champ. It is ULTRA nice.
Click to expand...
yea weird that happened ?( , but nothing is ever perfect, and aggreed the HAS is amazing.. Enjoy!, i sure have been :thumbup:
 
I would like to be added to the waitlist :D

I'm interested in the following:

1x HAS
1x CPS1 kick harness

Thanks!
 
Last edited:
hernan43 said:
Yeah my voltmeter went udders up on the second day, but my HAS has been working like a champ. It is ULTRA nice.
Click to expand...
So this is the fourth one. Looks like I got a bad batch of voltmeters, it's the only PCB I don't produce myself for obvious reasons :( I'll send out information about this to all buyers as a heads up and replace the broken voltmeters (need to find a different supplier, though) or reimburse the cost of getting a new one.
 
RGB said:
hernan43 said:
Yeah my voltmeter went udders up on the second day, but my HAS has been working like a champ. It is ULTRA nice.
Click to expand...
So this is the fourth one. Looks like I got a bad batch of voltmeters, it's the only PCB I don't produce myself for obvious reasons :( I'll send out information about this to all buyers as a heads up and replace the broken voltmeters (need to find a different supplier, though) or reimburse the cost of getting a new one.
Click to expand...
I'll check out mine when I finally get my hands on it. Seems to be stuck in customs right now...

Perhaps for those in North America, you could provide the serial number of the one you used, so perhaps we can source them here rather than do the shipping across the pond. Shipping and customs is really being a pain, at least for me, these days.
 
I haven't used my HAS at all, just used it to test the setup, hopefully its just a few bad voltmeters and not all but if 4 already are duds....

RGB- I assume you calibrate these before sending out?
 
Yes, each is checked for several minutes when I do the QC of HAS units, so all worked just fine. They seem to die after some time from what users reported. As a reassurance, 4 units is less than 10%.
 
@xtrasmiley is going to kill me... :P
I'm getting the best quality picture overall on this BenQ LCD setup using the HD15 (VGA) connector of the HAS+OSSC.

@RGB BitBox SNES case used for HAS support (that PCB ain't cheap)! ;)
zuN03kh.jpg


nKU9q60.jpg


This was super noisy with every 8-pin din to SCART cable I had...
86BGCHG.jpg


And don't get me wrong, you can still see a faint noise pattern on the left hand side of the screen.
Still it's nothing compared with my many SCART cables.
 
So awesome! We seriously need more pictures with the HAS setups in this thread.
jassin000 said:
And don't get me wrong, you can still see a faint noise pattern on the left hand side of the screen.
Click to expand...
From my experience, the diagonal interference usually (but not always) comes from the PSU.
 
Last edited:
RGB,

Is there an estimate for when reservations (specially my reservation) on the waiting list will be fulfilled. I'm not trying to trick you into promising a specific delivery date.

It would be helpful, even if you can only provide a broad estimate ie. "within a couple weeks" or "before spring" or "over six months", etc. I'm just trying to coordinate with other purchases.
 
  • Like
Reactions: RGB
jassin000 said:
@xtrasmiley is going to kill me... :P
Click to expand...
No dude, no killing here. I actually only asked you a bunch of questions and quoted you because I respect your experience and knowledge. I never meant to piss you off. Apologies if my questions came off as attacks.

I assume you blocked me b/c I was asking about the VGA cable...

That being said, if I ever get a Mortal Kombat board, I'll mess around with it and see if I can get it to work outside of the SCART side too.
 
Hello RGB

Ben here from New York, kudos for your work and appreciate the fact that you still doing these, i can see that is a great product.

I am a neo geo guy, i love fighting games specially king of fighters, there is place here in brooklyn with 2 arcade machines and the competition is great so i would like to practice more and what is better than authentic hardware as i noticed that emulators are just not the same.

I would like to be added to the waiting list for the below:

1x HAS

Thanks & Regards
 
You must log in or register to reply here.
Back
Top