All one slot boards are jamma standard, so yes, the chance of damaging the amp is there for them also.
Home Arcade System
- Thread starter RGB
- Start date
All one slot boards are jamma standard, so yes, the chance of damaging the amp is there for them also.
Jorel81
Enthusiast
Hey guys, i have a CPS1 question. I recently got my first CPS1 board (Street Fighter2) and when trying to use my HAS CPS1 kick harness i was not able to connect it to the C Board. So i made some alterations to the kick harness to get it to connect to the C Board. Now its connected but there are still no kicks. My CPS2 games work fine with kicks so its not my joystick. Are there different pinouts for CPS1 kick harnesses? Just a bit confused. Any help would be hugely appreciated. Thanks! 
the Goat
Grand Master
Can you post some pictures showing the modifications you made and where you are plugging it in?Hey guys, i have a CPS1 question. I recently got my first CPS1 board (Street Fighter2) and when trying to use my HAS CPS1 kick harness i was not able to connect it to the C Board. So i made some alterations to the kick harness to get it to connect to the C Board. Now its connected but there are still no kicks. My CPS2 games work fine with kicks so its not my joystick. Are there different pinouts for CPS1 kick harnesses? Just a bit confused. Any help would be hugely appreciated. Thanks!
Jorel81
Enthusiast
Sure! Pictures are attached. It would not fit so the only modifications i made were to the connection on the kick harness on the board end. To be clear, i only shaved some of the plastic off of the connector.
Attachments
Jorel81
Enthusiast
Yep. Just confused. Don’t know why my HAS CPS1 kick harness does not fit this C Board. I guess there were different connectors used per CPS1 C Boards?
clintkolodziej
Enthusiast
That connector on your C-board doesn’t look stock to me, they are generally white. Any idea if a previous owner replaced it with a different connector?
Jorel81
Enthusiast
Heh i suppose that’s possible...
AlxUnderBase
Enlightened
@Jorel81 ... Sir , the connector with 10 pins who is used normaly on that C boards are : https://octopart.com/b10p-shf-1aa(lf)(sn)-jst-18735903
Jorel81
Enthusiast
Okay. Thanks for the info guys! I think i got it figured out. I just had to modify my cps1 kick harness and swap the wires around got all my kicks working now! Super stoked. I think it is a none stock connector on my C Board. All good. Can swap it some other time. Again, thanks guys!
AlxUnderBase
Enlightened
clintkolodziej
Enthusiast
They did that to mine too. Seems to have survived as far as I can tell. Hopefully I have time tomorrow to assemble and fire it up. Definitely a good mail day!Excited to finally get my HAS, a little weary that US Customs and Border Patrol ravaged into the package.
Mine just updated and fedex said "clearance issues have been resolved for your package" and the "shipment has been released for delivery." So I wonder if it has been gone through/opened by customs. I should find out tomorrow when it's delivered.
Haha US Customs probably saw quite a bit of these thinking WTF!?!
I'm sure it didn't help it was numerical display with wires and a bare PCB. Looking forward to your result. Still waiting to buy the PSU.I’m happy to say mine arrived unmolested.Haha US Customs probably saw quite a bit of these thinking WTF!?!
Good to hear! My box was opened, just wasnt sure if they took out the PCB from the plastic bag.
I would guess they wouldn't need to open the bag to see that its just a pcb. Where were you looking at buying your power supply from?