What's new

Home Arcade System

erdrick1980 said:
I was the one that purchased that. I have yet ro test it out since it's taken forever for the mini pinDIN cable scart to come from England.

My only concern is about this HAS supergun is, can I connect PC speakers to the HAS via 3.5m? The speakers are the Z5300 I think the model is. it's 2 speakers with a subwoofer with Amp already inside. Will I damage the HAS if I connect it?
Click to expand...
No the HAS audio out is like a standard headphone jack.
 
  • Like
Reactions: RGB
XtraSmiley said:
No the HAS audio out is like a standard headphone jack.
Click to expand...

Oh?! Perfect!! okay thats good news then.

Thank you so much for the fast response!

Can't wait to play 1945 strikers II and III PCB on my PVM 20M2U! Although the Sony CRT 27 looks better to me, cause size, just that I would have to go and get another adapter. I'm so tired of adapters for this and that.. lol it's chaotic! Sorry I'm rambling. Thank you ,thank you!
 
erdrick1980 said:
Oh?! Perfect!! okay thats good news then.

Thank you so much for the fast response!

Can't wait to play 1945 strikers II and III PCB on my PVM 20M2U! Although the Sony CRT 27 looks better to me, cause size, just that I would have to go and get another adapter. I'm so tired of adapters for this and that.. lol it's chaotic! Sorry I'm rambling. Thank you ,thank you!
Click to expand...
No problem. I use mine on a 32" Sony TV, so trust me, it's worth one more adapter!
 
XtraSmiley said:
If you make it down to DC I'll hook you up, I have 2. But I just realized, they are 36" not 32"! Heavy AF.
Click to expand...

Oh wow!! those would be my prefer choice!! 36 are a dream!!! And very nice of you!! Unfortunately if i got it, i would have to sleep outside my apt! haha!

Thank you though! very nice of you. If i would of gotten it i'd pay you for it. But, thank you anyways brother!
 
@RGB Can you please verify that this is the connector/pinout for PSU input on the HAS. Thank you :)

1649286304689.png
 
Last edited:
  • Like
Reactions: RGB
I saw that preorders are opening on Sunday. Any chance you'll have the 3P4P adapter available for preorders? I don't need a full HAS setup, just the 3P4P.
 
  • Like
Reactions: RGB
So I need a little bit of help. I have the HAS 4.1 and button 6 is registering as always being pushed on players 1 and players 2. I've tried re-mapping the buttons and it still registers button 6 on both players 1 and 2 as being pushed. This even occurs when the controller connected doesn't have a 5th and 6th button. I've already replaced the Atmel chip on the board as I had purchased an extra when I ordered my HAS from RGB. Thanks in advance... Also, I did accidentally reversed the jamma connector and damaged one of my boards a few months ago using a jamma extension cable (not RGB's)
 
pfitz1982 said:
So I need a little bit of help. I have the HAS 4.1 and button 6 is registering as always being pushed on players 1 and players 2. I've tried re-mapping the buttons and it still registers button 6 on both players 1 and 2 as being pushed. This even occurs when the controller connected doesn't have a 5th and 6th button. I've already replaced the Atmel chip on the board as I had purchased an extra when I ordered my HAS from RGB. Thanks in advance... Also, I did accidentally reversed the jamma connector and damaged one of my boards a few months ago using a jamma extension cable (not RGB's)
Click to expand...
Do you have multiple boards to test?

Have you confirmed button 6 on your control panel or controller isn’t shorted to ground?
 
pfitz1982 said:
So I need a little bit of help. I have the HAS 4.1 and button 6 is registering as always being pushed on players 1 and players 2. I've tried re-mapping the buttons and it still registers button 6 on both players 1 and 2 as being pushed. This even occurs when the controller connected doesn't have a 5th and 6th button.
Click to expand...

It looks like the Player 1 and Player 2 button 6 JAMMA output is set to "ON" on the dipswitch "SW2", please check that.
 
Two HAS arrived in the mail, plus accessories. Hooray!

@RGB What connector and terminals do I need to connect to that B6P-VH connector at CN1 if I'm building a custom power cord? Is this VHR-6N the matching socket? I'm building the universal versions of printmaker's Suzo Happ PSU cover and Mean Well PSU cover, so the idea is to connect to a Mini-Fit Jr. 5559 on the PSU side for quick connect.
 
You must log in or register to reply here.
Back
Top